Blaupunkt Car Stereo System 320 User Manual

17

 

쏅 In the Bluetooth® menu, select the "PAIRING" 

menu item.

 

쏅 Press the rotary control 

7

 to open the menu.

The "MOBILE PHONE" menu item is selected.

 

쏅 Turn the rotary control 

7

 to select the 

"STREAMING" menu item.

 

쏅 Press the rotary control 

7

 to register a 

streaming device.

The display shows the currently stored 
PIN (default "1234"). If required, enter the 
PIN of the streaming device:

 

쏅 Turn the rotary control 

7

 to select a digit for 

the respective position.

 

쏅 Press the rotary control 

7

 to go to the next 

position.

 • To return to the previous position for the 

PIN entry, turn the rotary control 

7

 until 

the "<<<" option is selected, and press the 
rotary control 

7

.

 • Not all streaming devices require the entry 

of a PIN on the car sound system. For some 
streaming devices, you have to enter the 
PIN of the car sound system instead. For 
these devices, press only the rotary control 

7

 repeatedly until you reach beyond the 

last position, thereby confi rming the cur-
rent PIN, and then enter this PIN on the 
streaming device.

The display shows "PAIRING" and the Blue-
tooth® symbol   is fl ashing. The car sound sys-
tem can now be recognised by the streaming 
device for approx. 2 minutes and connected.

 

쏅 Search the car sound system from your stream-

ing device (Bluetooth® name: "BP 420 BT") and 
establish the connection. Enter the PIN of the 
car sound system, if necessary.

The display may show "PAIRED", followed by 
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are paired and 
connected.

 • If no connection can be established, the 

display briefl y shows "CONNECT FAILED".

 • After switch-on, the car sound system 

automatically attempts to reconnect the 
device connected last. If the connection 
attempt fails, the display briefl y  shows 
"CONNECTION LOST". If necessary, attempt 
to re-establish the connection from the 
streaming device.

Answering/rejecting an incoming phone call
With an incoming call, the display alternately 
shows "INCOMING CALL" and the number of the 
caller. The current audio source is muted and a 
ring tone is played via the loudspeakers of the car 
sound system.

Note:
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE NUM-
BER" instead of the number. If the number 
of the caller is stored together with a name, 
the name of the entry and the number are 
displayed (see the section "Storing a phone 
number in the car sound system" in this chap-
ter).

 

쏅 Press the 

 button 

=

 to answer the call.

"CALL" and the duration of the ongoing call 
are displayed.

 

쏅 Press the 

 

<

 button to reject the call or 

to end the current call.

The display shows "CALL END".

 • During the call, you can adjust the volume 

with the volume control 

4

 or mute the 

device with a short press of the On/Off  
button 

3

.

 • You can adjust the volume for the call play-

back in the user menu (see the chapter 
"User settings", section "Making settings in 
the "VOLUME" menu", menu item "HANDS-
FREE VOL").