Bissell ReadyClean PowerBrush Deep Cleaner 47B2 User Manual

Page of 12
Your
 
deep cleaner assembles quickly and 
easily. The only tool you will need for 
assembly is a Phillips head screwdriver.
1.  
locate the screw pack, which is taped  
to the upper handle.
2.  slide the upper body onto the lower 
body, taking care not to leave a gap 
between the upper and lower body.
3.  firmly holding the upper body, screw the  
2 screws into the holes marked with arrows. 
TIP: if you are having difficulty tightening the 
screws, remove, re-insert, and tighten again.
4.  after tightening the screws, ensure proper fit 
between the upper and lower body by trying 
to separate the two. if assembled properly, 
there should be no gap. if a gap appears 
between the two (see picture at right), continue 
to tighten the screws until no gap is present.
5.  slide upper handle into upper body by 
aligning the pin and sliding into place.
 
NOTE: Be sure to secure upper 
handle before lifting. Rotate handle 
lock clockwise to secure.
6.  Place solution tank on back of unit.
7.  Wrap power cord.
Assembly is now complete.
Before you clean
1.  move furniture to another area if  
cleaning an entire room. (optional)
2.  Vacuum carpet thoroughly.
3.  Plan your cleaning route to leave an exit 
path. it is best to begin cleaning in the 
corner farthest from your exit.
4. Pre-Treating (optional) Pre-treat stub-
born stains and highly soiled carpet in 
hallways and other high-traffic areas.
4a. generously spray bissell tough stain 
Pretreat evenly over soiled area. 
Caution: DO NOT OVERWET CARPET
4b. Wait 3-5 minutes before deep cleaning.
Fill the tank
1.  Remove the solution tank by lifting it straight 
up, then away from the lower body.
2.  unscrew the black cap at the bottom  
of the solution tank.
w w w. b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1
A
ssembly 
5
2.
5.
6.
3.
O
perations
 
WARNING:
to reduce the risk of fire, use only 
bissell advanced deep cleaning 
formula for full size machines  
in your deep cleaner. use of cleaning 
formulas that contain lemon or pine 
oil may damage this appliance and 
void the warranty. chemical spot 
cleaners or solvent-based soil  
removers should not be used. These 
products may react with the plastic 
materials used in your deep cleaner 
causing cracking or pitting. 
2.
1.
pin
CORRECT
INCORRECT
4.