Benq SH940 Owner's Manual
39
Using the projector
En
glish
v. Press Exit to go back to the remote network operation page.
The info page displays the information and status of this projector.
For more information, visit
http://www.crestron.com
&
www.crestron.com/getroomview
.
Operating in a high altitude environment
We recommend that you activate High Altitude Mode when your environment is higher than 1500
meters (around 4920 feet) above sea level, or whenever the projector will be used for extended periods
of time (>10 hours) without shutdown.
meters (around 4920 feet) above sea level, or whenever the projector will be used for extended periods
of time (>10 hours) without shutdown.
To activate High Altitude Mode:
1. Press MENU on the projector or MENU/EXIT on the remote control, and then press / until
1. Press MENU on the projector or MENU/EXIT on the remote control, and then press / until
the Advanced Setup menu is highlighted.
2. Press to highlight High Altitude Mode.
3. Press /
3. Press /
to
select
On. A confirmation message is displayed.
4. Highlight Yes and press ENTER.
Operation under High Altitude Mode may cause a higher decibel operating noise level because of
increased fan speed necessary to improve overall system cooling and performance.
Operation under High Altitude Mode may cause a higher decibel operating noise level because of
increased fan speed necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display auto shut-
down symptoms, which is designed to protect your projector from over-heating. In cases like this, you
should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this
projector can operate under any and all harsh or extreme conditions.
down symptoms, which is designed to protect your projector from over-heating. In cases like this, you
should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this
projector can operate under any and all harsh or extreme conditions.
Press Exit to go
back to the
remote network
operation page.
SH940_EN.book Page 39 Wednesday, October 3, 2012 2:36 PM