Behringer Ultragain Pro MIC2200 Specification Sheet
2
ULTRAGAIN PRO MIC2200 Technical Specifications
ULTRAGAIN PRO MIC2200
Audiophile Vacuum Tube Microphone/Line Preamplifier
Ultra-low noise discrete microphone/line preamplifier with hand-selected 12AX7 tube for ultra-musical sound
Mic input stage based on discrete, conjugate transistor pair circuitry
Ultra-wide bandwidth from 10 Hz to 200 kHz for “open” sound
Integrated fully parametric EQs with dedicated center frequency, bandwidth and level controls
Independent line driver for converting -10 dBV into +4 dBu pro level
Soft-mute +48 V phantom power to avoid switch-on thumps
Fully tunable and switchable 12 dB high-pass filter
Switchable phase reverse for correcting phase-related problems
Accurate 12-segment LED metering for output level
Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specifications
Audio Input
Microphone
Connectors XLR
Type
Type
transformerless, DC-decoupled input
Impedance
3 k Ohms balanced
Maximum input level
+10 dBu balanced and unbalanced
CMRR
typ. 40 dB, >55 dB @ 1 kHz
Line
Connectors
XLR and 1/4" jack
Type
transformerless, DC-decoupled input
Impedance
60 kOhms balanced
Maximum input level
+23 dBu balanced and unbalanced
CMRR
typ. 40 dB, >55 dB @ 1kHz
Audio Output
Connectors
XLR and 1/4" jack
Type
electronically servo-balanced
output stage
Impedance
60 Ohms balanced,
30 Ohms unbalanced
Maximum output level
+21 dBu balanced and unbalanced
System Specifications
Frequency response
10 Hz to 200 kHz, ±3 dB
Noise
>94 dBu, unweighted, 22 Hz to 22 kHz
THD
0.011% typ. @ +4 dBu, 1 kHz, Gain 1
IMD
0.01% typ. SMPTE
Crosstalk
<-88 dB, 22 Hz to 22 kHz
Function Controls
Mic gain
variable (+10 dB to +60 dB)
Frequency (lo cut)
variable (12 to 320 Hz)
Frequency (PEQ)
variable (10 Hz to 20 kHz),
dependent on x10 and x0.1 switch
Bandwidth
variable (0.03 to 2 octaves)
Level
variable (-15 dB to +15 dB)
Output
variable (-20 dB to +20 dB)
Function Switches
+48 V
activates phantom power
Mic/line
switches from line to mic preamplifier
Phase rev.
phase reverse (180°)
Lo cut
activates the high-pass filter
x 0.1
switches the frequency control to
10 Hz - 200 Hz
x 10
switches the frequency control to
1 kHz - 20 kHz
EQ in/out
activates the parametric filter
Indicators
Clip
clipping control LED
Output level
12-segment LED display:
-30/-24/-18/-12/-6/-3/0/+3/+6/
+9/+12/+18 dB
function switch
LED indicator of every switch