Behringer U-Control UCA222 User Manual

U-CONTROL UCA222 User Manual

(5) 

OUTPUT – Connect to a speaker system using stereo RCA 

cables to monitor the audio output from the computer.

(6) 

INPUT – Connect desired recording signal using audio 

cables with RCA connectors.

(7) 

OFF/ON MONITOR – With the MONITOR switch OFF, 

the headphone output receives the signal from the 

computer over the USB port (same as the RCA output 

jacks). With the MONITOR switch ON, the headphones 

receive the signal connected to the RCA INPUT jacks.

(8) 

USB CABLE – Sends information to and from your computer 

and the UCA222. It also provides power to the device.

•  This device requires no special setup or drivers, just plug it 

into a free USB port on a PC or Mac.

•  The UCA222 comes with a free version of Audacity editing 

software. This will help make the transfer process quick 

and simple. Simply insert the CD into your CD-ROM 

drive and install the software. The CD also contains VST 

plug-ins, ASIO drivers and various freeware.

The UCA222 provides an easy interface between your 

computer, mixer and monitoring system. Follow these steps for 

basic operation:
1)  Connect the UCA222 to the computer by plugging the 

USB cable into a free USB port. The power LED will light 

automatically.

2)  Connect the audio source that is to be recorded, such as a 

mixer, preamp, etc. to the INPUT stereo RCA jacks.

3)  Plug a pair of headphones into the 1/8" PHONES jack and 

adjust the volume with the adjacent control. You may 

also monitor the output by plugging a pair of powered 

speakers into the OUTPUT stereo RCA jacks.

4)  You may also send the stereo signal in digital audio format 

(S/PDIF) to an external recording device via the OPTICAL 

OUTPUT using a Toslink fiber optic cable.