Behringer Tube Ultragain MIC200 User Manual

TUBE ULTRAGAIN MIC200 User Manual

2.2 Rear panel

(12)

(11)

(10)

Fig. 2.2: The rear panel of your MIC200

(10)

The balanced ¼" TRS INPUT of your MIC200 can be used to connect your

electric guitar, for example. This input is wired parallelly to the XLR input.

Ideally, the balanced

XLR INPUT

should be used to connecta microphone.

◊ In contrast to its outputs, the MIC200’s inputs should never be

used simultaneously!

(11)

This is the balanced XLR OUTPUT of your MIC200. Use this connector to feed the

XLR input of your mixing console, multitrack recorder or power amp.

The balanced ¼"

TRS OUTPUT

of your MIC200 can also be connected to a mixer,

recording system or power amp.

(12)

Use the POWER SUPPLY CONNECTOR to hook up the enclosed power supply

unit. Next to this connector you’ll find the strain relief clamp, which prevents

accidental release of the power supply.

The device’s SERIAL NUMBER is found on the bottom side of the unit.