Behringer Pro Mixer VMX1000USB User Manual
ENGLISH
PRO MIXER VMX1000USB User Manual
8
ENGLISH
PRO MIXER VMX1000USB User Manual
9
Installation
3.
Audio connections
3.1
for various applications, you will need a number of different
cables. The following illustrations show how these cables are
to be connected. Always make sure to use high-grade cables.
cables. The following illustrations show how these cables are
to be connected. Always make sure to use high-grade cables.
Be sure that installation and operation of your
◊
VMX1000USB are performed only by qualified
personnel. During as well as after installation, sufficient
grounding of both your equipment and persons
handling it must be assured. Otherwise, electrostatic
discharge may lead to undesirable operation or
permanent damage.
personnel. During as well as after installation, sufficient
grounding of both your equipment and persons
handling it must be assured. Otherwise, electrostatic
discharge may lead to undesirable operation or
permanent damage.
Fig. 3.1: XLR connections
Fig. 3.2: ¼" TS connector
strain relief clamp
sleeve
ring
tip
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced 1/4" TRS connector
ring
cold (-ve)
tip
tip
hot (+ve)
Fig. 3.3: ¼"TRS connector
Fig. 3.4: ¼" TRS headphone connector
Fig. 3.5: RCA cable
input
output
For unbalanced use, pin 1 and pin 3 have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
1
2
3
1
2
3
Balanced use with XLR connectors
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
Unbalanced ¼" TS connector
Tip
(signal)
strain relief clamp
sleeve
ring
tip
ring
tip
sleeve
ground/shield
1/4" TRS headphones connector
ring
right signal
tip
tip
left signal
shield
sleeve
sleeve
tip
tip
AUDIO INPUTS
Mic In
40 dB gain, XLR,
electronically balanced input stage
Phono In
40 dB gain, unbalanced input
Line In
-17 to +4 dB gain, unbalanced inputs
Return
0 dB gain, unbalanced
Mic Aux Return
3 dB gain, unbalanced
AUDIO OUTPUTS
Main Out
max. 25 dBu @ 1 kHz, XLR
electronically balanced
Main 2 Out
Max. 21 dBu @ 1 kHz unbalanced
Tape Out
typ. 0 dBu
Send
typ. 0 dBu
Mic Aux Send
-oo to +6 dBu
Phones Out
max.180 mW @ 75 Ω
SUBWOOFER
Subwoofer Out
XLR, electronically balanced
X-Over
variable 30 Hz - 200 Hz
Level
-oo to 0 dBu @ 0 dB input
EQUALIZER
Stereo Low
+12 dB/-32 dB @ 50 Hz
Stereo Mid
+12 dB/-32 dB @ 1.2 kHz
Stereo High
+12 dB/-32 dB @ 10 kHz
Mic Low
+15 dB/-15 dB @ 80 Hz
Mic Mid
+15 dB/-15 dB @ 2.5 kHz
Mic High
+15 dB/-15 dB @ 12 kHz
USB
Audio
Stereo In/Out
Connector
Type B
Converter
16-bit
Sample rate
48 kHz
SYSTEM SPECIFICATIONS
Signal-to-noise ratio
> 80 dB (line)
Crosstalk
< -70 dB (line)
Distortion (THD)
< 0.05 %
Frequency response
10 Hz - 65 kHz, +0/-3 dB
POWER SUPPLY
Mains voltages
USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
Power consumption
22 Watt
Fuse
100 - 120 V~: T 500 mA H
200 - 240 V~: T 250 mA H
Mains connection
Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions
(H x W x D)
107 mm (43/16") x 483 mm (19")
x 223 mm (8 3/4")
Weight
3.6 kg (7 lb. 14 oz.)
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice.
Thus, the specifications and design of the device may differ from the information given in this manual.
Thus, the specifications and design of the device may differ from the information given in this manual.
Specifications
4.