Behringer Minimon MON800 User Manual

MINIMON MON800 User Manual

There are various ways to integrate the MON800 into your set-up. 
Depending on the application in question, you will need different sets 
of connecting cables. The cables to use are described below.

Please use standard 1/4" or cinch cables to connect the MINIMON to 
other equipment. These cables have a 1/4" or cinch connector at each 
end. Connect the inputs and outputs of the MON800 to the respective 
connectors of the other devices.  

Fig. 5.1: Wiring diagram of a hi-fi cinch cable

Fig. 5.2: Unbalanced cable with 1/4" TS connectors

The MINIMON features a jack for the connection of a footswitch. 
Here, you can connect any commercially available footswitch with 
a 1/4" TS connector. As some footswitch models on the market have 
a different polarity, please be sure to use one that is appropriately 
wired. The correct wiring is shown in the illustration below.

The footswitch connects both poles momentarily

Fig. 5.3: Wiring of a 1/4" TS connector for footswitch connection

The MINIMON has two jacks for headphones. Here, you can connect 
any standard pair of stereo headphones with a 1/4" TRS connector. 
For 3.5-mm plugs you need an appropriate adaptor. The correct 
wiring diagram is shown in the illustration below.

Fig. 5.4: Wiring of a 1/4" TRS headphones connector