Behringer Minifex FEX800 User Manual

MINIFEX FEX800 User Manual

There are various ways to integrate the FEX800 into your set-up. 
Depending on the application in question, you will need different sets 
of connecting cables. The cables to use are described below.

Please use standard insert cables equipped with 1/4" connectors to 
connect the MINIFEX to the insert path of a mixing console. 
These Y cables have two 1/4" TS connectors at one end, and one 1/4" TRS 
connector at the other. Connect the plug marked „Send“ to the 
INPUT L jack on the effects unit. Connect the „Return“ plug to the 
OUTPUT L jack on the device. Connect the TRS connector to the insert 
jack of the channel strip on the mixing console. Use two insert cables 
for stereo sub-groups and main-mix inserts. The second cable must 
be connected to the INPUT/OUTPUT R jacks of the FEX800.

Fig. 5.1: Insert cable with two 1/4" TS and one 1/4" TRS connector

To wire the MINIFEX in series with other equipment or via the aux 
paths of a mixing console, please use 1/4" cables, sometimes also 
referred to as patch cords. These cables have a 1/4" connector at each 
end. Connect the aux send outputs of your console to the inputs, 
and the aux returns to the outputs of the MINIFEX. You can also 
connect balanced stereo 1/4" cables to the MINIFEX outputs.

Fig. 5.2: Unbalanced cable with 1/4" TS connectors

Return

(out)

Send

(in)