Behringer Europack Pro RX1202FX Brochure

Ultra-low noise ULN design, highest 
possible headroom, ultra-transparent 
audio

8 new state-of-the-art, studio-grade 
IMP “Invisible” Mic Preamps with:

130 dB dynamic range for 24-bit,  
192 kHz sampling rate inputs

Ultra-wide 60 dB gain range

Integrated 24-bit digital stereo FX 
processor with 100 awesome presets 
including reverb, chorus, flanger, 
delay, pitch shifter and various 
multi-effects

Effective, extremely musical 2-band 
EQ and Clip LED on all channels

4 balanced high-headroom 
line inputs

State-of-the-art 4580 operational 
amplifiers provide lowest noise 
and distortion—better than 
4560 op amps

2 aux sends per channel: 1 pre fader 
for monitoring applications, 1 post 
fader for internal FX or as 
external send

CD/tape inputs assignable to main 
mix or control room/phones outputs

Separate control room, phones and 
stereo CD/tape outputs

Looking for a versatile line/mic 

mixer that fits in a rack AND eliminates 
the need for tons of outboard gear? 
The 12-channel RX1202FX is not only 
rack mountable, but comes loaded with 
a 24-bit multi-FX processor and 8 built-in 
studio-grade IMP “invisible” mic preamps. 
This mixer works perfectly for small bands 
or churches, business conferences with 
both microphone and A/V equipment 
as well as sub-mixing keyboards, drums, 
samplers or multiple vocal mics. It’s also 
the ideal choice for monitoring multi-
track recording projects. 

Sometimes you feel like a mic…or a 

sampler…or a drum machine. Sometimes 
you don’t. Whatever the situation calls for, 
the RX1202FX is ready to accommodate. 
Each mono channel (1-8) features an 
XLR input, a balanced ¼" mono input and 
an INSERT jack for patching external signal 
processors directly into the channel. 

Mono channels feature a TRIM 

control and CLIP LED to adjust the 
input gain; a two-band EQ (HIGH, MID and 

LOW controls); FX control to determine 
how much of an effect to apply to the 
channel; a PAN control; and a smooth 
60 mm fader to determine the channel’s 
level in the mix. 

Stereo channels (9-12) feature left 

and right balanced line level ¼" inputs 
and the same front panel control as their 
mono counterparts. And, as mentioned 
above, they can be used as mono 
inputs themselves.

Smooth 60 mm faders and intuitive 

rotary dials make it quick and simple 
to create a killer mix. The MAIN MIX 
fader adjusts the volume of the main 
output signal while the dual 4-segment 
LED ladder display gives a visual 
representation of the signal level. The 
PHONES jack features a dedicated 
PHONES/CONTROL ROOM dial for 
adjusting headphone volume. Push CD/
TAPE TO MIX to add backing tracks from 
an MP3 or CD player, or to isolate a click 
track or scratch track in headphones 
while recording.

Rackmount Mixers