Behringer Digital Pro Mixer DDM4000 User Manual

DIGITAL PRO MIXER DDM4000 User Manual

BITCRUSHER reduce the digital resolution. The bit depth is adjustable.
REVERB is a reverberation effect. Eight different types of reverberation 

are available. These are described in detail in Chapter 4.1.4.
1)  Press the CONSOLE SETUP knob  

(51)

  to select a parameter.

2)  Turn the CONSOLE SETUP knob to change the value of this parameter.
You can match the time parameter of the flanger, phaser, delay and echo effects 

to the beat by tapping the tempo with the left TAP push button  

(50) 

 as long as 

Mic Setup is displayed (MIC SETUP push button  

(16)

  shines when active).

Press the ESC push button  

(52)

  to exit Mic Setup.

3.3.2  Talk setup
The Talkover function is useful when making announcements while the music 

is playing. The level of the music, is attenuated as soon as you speak into 

the microphone. All necessary settings of this function are made in Talk Setup. 

This is how you access Talk Setup:
1)  Press the CONSOLE SETUP knob  

(51)

  for approximately 2 seconds.

2)  Select “Talk Setup” by turning and pressing the CONSOLE SETUP knob.
The Talk Setup page appears on the display.

This page displays level meters for both microphones. On the left-hand side 

of the screen, there is a list from which you can select a Talkover preset.

Loading presets:
1)  Turn the left PARAMETER knob  

(45) 

 to select the preset.

2)  Press the PARAMETER knob to load the preset.

Editing talkovers:
The following parameters of the Talkover function are adjustable: 

THRSH 

Threshold. The music signal is attenuated as soon as the  

 

microphone signal exceeds this value.

MAX. ATT  Maximum Attenuation. This lets you adjust the music’s maximum  

 

attenuation while speaking into the microphone.

SPEED 

Adjusts the speed at which the signal’s volume level is reduced.

1)  Press the right PARAMETER knob  

(45) 

 to select the parameter 

(THRSH, MAX. ATT, SPEED)

2)  Turn the PARAMETER knob to change the value of the parameter.

Press the ESC push button  

(52)

  to exit Talk Setup.

The use of the Crossfader is easy to understand, even for a DJ novice. 

But the DDM4000 wouldn’t be a digital mixer if it hadn’t a couple of special 

functions to offer that cannot be easily realized with an analog DJ Mixer.

3.4.1  Crossfader modes: KILL and X-OVER
There are three push buttons labeled HIGH, MID and LOW (

 (22) 

) on the left-hand 

side and on the right-hand side of the Crossfader. When activated, they function 

as Kill switches, that is they can suppress specific frequency bands.
X-Over (Crosssover) Mode lets you realize completely new, breathtaking effects. 

In this mode, it is possible to assign specific frequency bands to Side A and B 

that can then be crossfaded.Here’s an example to make the functionality clear:
1)  Move the crossfader  

(20) 

 to the left (A).

2)  Press the FULL FREQ push button  

(23) 

 in Section A.

3)  Press the Kill push button  

(22)

  “MID” in Section B.

In the left crossfader position, the A signal is played back in its complete 

frequency range. By moving the crossfader to the right, only the mid frequencies 

of the B signal are faded in while the mids of the A signal are faded out. 

The low and high frequencies of the A signal remain audible. As a result, 

the low and high frequencies of the A signal together with the mid frequencies 

of the B signal are audible at the output of the mixer. 

X-Over Mode keeps your mixing style fresh and unique. You can activate 

X-Over Mode in Crossfader Setup.

3.4.2  Crossfader setup
This is how you access Crossfader Setup:
1)  Press the CONSOLE SETUP knob  

(51) 

 for approximately 2 seconds.

2)  Select “Crossfader Setup” by turning and pressing the CONSOLE SETUP knob.
The Crossfader Setup page appears on the display:

On the display’s left side, you can adjust the frequency crossfade of the 

Kill push buttons. On the right side, you can select Cross-fader Mode.

LOW:  Crossover frequency between LOW and MID
HIGH:   Crossover frequency between MID and HIGH

1)  Press the left PARAMETER knob  

(45) 

 to select the parameter (LOW, HIGH).

2)  Turn the PARAMETER knob to change the value fo the selected parameter.

Crossfader Mode:
1)  Turn the right PARAMETER knob  

(45) 

 to select the mode (KILL, X-OVER).

2)  Press the PARAMETER knob to confirm.