Britax FRONTIER 85 User Manual
54
55
Firmly press the Versa-Tether
5
®
hook to the vehicle tether
anchor to attach. Remove all
slack from the tether webbing.
Use the elastic strap to contain
Use the elastic strap to contain
6
extra webbing.
Always ensure any excess
*
webbing is contained within
your vehicle
Use the vehicle’s lap-shoulder
7
belt to secure your child.
Lap-Shoulder Belt
Ensure that the positioning
1
block is rotated to the back.
Place the child seat on the
2
vehicle seat and use the
vehicle’s lap-shoulder belt to
secure your child.
OR
OR
Positioning the Child Seat: Booster Mode
WARNING!
Never route the vehicle belt over the child when using this
•
child seat in harness mode.
Adjust the belts provided with this child seat so they
Adjust the belts provided with this child seat so they
•
fit snugly around your child. A snug strap should not
allow any slack. It lies in a relatively straight line without
sagging. It does not press on the child’s flesh or push the
child’s body into an unnatural position.
The HUGS™ chest pads must be used at all times.
The HUGS™ chest pads must be used at all times.
•
Adjust the harness to fit the clothes the child is wearing.
•
Remove bulky coats and/or jackets before putting the
child in the child seat.
Verify that the child seat is secure and the harness is
Verify that the child seat is secure and the harness is
•
properly adjusted around the child
each time the child
seat is used.
Harness Mode
Before you begin:
Always check the seat area for debris and remove it to prevent
interference with the harness adjuster mechanism.
Positioning
Block
Securing Your Child