Britax FRONTIER 85 User Manual
10
11
Switchable Retractor in ALR Mode with Sliding Latch Plate
3.
Has a latch plate that freely
a
slides along the vehicle belt
webbing.
Has a retractor that can be
b
switched to function as an
ALR by pulling the vehicle
belt fully out until a clicking
sound can be heard when
retracting.
To use a child seat with this
*
type of vehicle belt, you will
need to switch to the ALR
mode or use a locking clip.
Compatible Vehicle Seat Belts
NOTE: The information in this section only applies to installation
NOTE: The information in this section only applies to installation
with vehicle belts.
Vehicle seats and seat belts differ from vehicle to vehicle. Refer to
Vehicle seats and seat belts differ from vehicle to vehicle. Refer to
your vehicle owner’s manual for specific information about your
vehicle belts and their use with child seats.
Lap-Shoulder (3-Point) Belt
ALR (Automatic Locking Retractor) with Sliding Latch Plate
1.
Has a latch plate that freely
a
slides along the vehicle belt
webbing.
Has a retractor that stops the
b
belt from being pulled out
again once the belt webbing
has been pulled out at least
24 in. (61 cm).
Tightens by feeding the
c
belt webbing back into the
retractor.
ELR (Emergency Locking Retractor) with Locking Latch Plate
2.
Has a latch plate that does
a
not allow the lap part of the
belt to become loose after it
is buckled.
Has a retractor that locks
b
only in an emergency
situation such as sudden
stop or crash.
Latch
Plate
Latch
Plate
Latch
Plate
Vehicle Compatibility
Vehicle Compatibility