Windsor 10070090 User Manual

 D100  86038260  05/21/07 

Check machine for cord damage 

Check recovery dome and gasket for 
damage and cleanliness 

Check hoses for wear, blockages, or 
damage 

Check handles, switches, and knobs 
for damage 

Check vac motor intake filter and clean 

Run one gallon of water through 
system 

Clean out recovery tank and check 
float valve to make sure it moves freely 

Clean out solution tank and remove 
and clean vacuum intake screen 

Clean outside of all tanks and check for 
damage 

Run vac motor for at least one minute 
to allow motor to dry 

Store with dome off tank to allow the 
tank to dry 

Check all gaskets for wear and leakage

Check vacuum intake screen for 
damage; replace if necessary 

Check pump pressure; observe spray 
pattern and check with gauge if 
necessary 

Check and clean solution screen 

Check cables for fraying 

Check overall performance of machine 

Check vac motor carbon brushes