Westinghouse 13 SEER, 7.7 HSPF Q7RD Packaged Technical Manual
• Quality Compressor: State of the art compressor is standard
equipment.
• R-410A Refrigerant: Earth friendly non-ozone depleting
refrigerant.
• Hi/Low Pressure Switches: Ensure long compressor life.
• Copper Tube / Aluminum Fin Coils: Outdoor coils are designed
• Copper Tube / Aluminum Fin Coils: Outdoor coils are designed
to optimize heat transfer, minimize size and cost, and increase
durability and reliability.
durability and reliability.
• Anteater Evaporator Coil: for increased resistance against
formicary corrosion, the number one cause of coil leaks.
~ The 2, 2.5 and 3 ton models include all-aluminum
~ The 2, 2.5 and 3 ton models include all-aluminum
Anteater Micro-channel technology.
~ The 3.5, 4 and 5 ton models include Anteater™ tubing
technology.
• Designed using Galvanized Steel: with a polyester urethane coat
finish. The 950 hour salt spray finish is 1.5 mil thick and resists
corrosion 50% better than comparable units.
corrosion 50% better than comparable units.
• Compact Footprint and Profile: make the Q7 Series easy to
install and transport.
• 0” Clearance: to combustibles on duct side of the unit allows
for installations in tight areas.
• Wire guard coated with Earth Friendly Epoxy and plastic
mesh hail guard: A guard that will never rust and protects the
units coil from being damaged.
units coil from being damaged.
• Raised Base Pan: allows water to drain away from away from
the unit.
• Easy Compressor and Control Access: Designed to make
servicing easier for the contractor, access panels are provided
to all controls and the compressor from the side of the unit.
to all controls and the compressor from the side of the unit.
• Easy access: to the evaporator coil for cleaning and general
maintenance.
• Removable Top Grille Assembly: Allows ease of service to
the fan motor.
• Time / Temperature Defrost: a reliable, industry standard control
offers various time settings to meet any type climate.
• Five Minute Restart Time Delay: when the units shuts down,
a five minute delay keeps the unit from restarting, eliminating
the highest cause of compressor failure.
the highest cause of compressor failure.
• Liquid Line Filter Driers: Factory installed at a convenient
location for service.
• Accessible Service Valves: simplify servicing of the refrigeration
system.
• Suction Accumulator: provides protection from liquid flood
back and future compressor failures.
• Permanently Lubricated Condenser Motor: A heavy duty
PSC motor for long lasting reliability and quiet operation.
• Low voltage Transformer: Includes 3 Amp fuse to protect low
voltage circuit.
• Drain Trap Included: design optimizes drainage capabilities.
• Outdoor thermostat: is standard equipment.
• Optional Electric Heat: Field installed 5 – 20 KW.
• Outdoor thermostat: is standard equipment.
• Optional Electric Heat: Field installed 5 – 20 KW.
13 SEER, R-410A
2 thru 5 Ton Units
Cooling: 24,000 to 56,000 Btuh
Heating: 24,000 to 54,400 Btuh
2 thru 5 Ton Units
Cooling: 24,000 to 56,000 Btuh
Heating: 24,000 to 54,400 Btuh
Q7RD Series
Single Packaged Heat Pump,
Single Phase
Single Phase
The Q7 Series single packaged heat pumps are high
efficiency self contained cooling and heating units that
can be installed on a slab. Units are ETL and ETLc listed.
efficiency self contained cooling and heating units that
can be installed on a slab. Units are ETL and ETLc listed.
FEATURES and BENEFITS
TECHNICAL
SPECIFICATIONS
SPECIFICATIONS