Westinghouse WP2300 Owner's Manual

  

23

1. 

High Pressure 
Nozzle (Red) – 
higher pressure 
and smallest spray 
pattern

NOTICE: The red 
nozzle can damage 
surfaces if it is held 
too close for an 
extended time

Use to clean hard, 
embedded dirt 
and grime. Use on 
concrete, brick, 
driveways and patios.

2. 

Medium Pressure 
Nozzle (Green) – 
medium pressure and 
medium spray pattern

Use to clean paint, 
stain, mildew, oil, and 
compacted dirt and 
grime. Use on wood 
decks, home siding, 
driveways and patios.

3. 

Low Pressure Nozzle 
(White) – lower 
pressure and widest 
spray pattern

Use to clean general 
loose dirt and grime. 
For use on most 
surfaces including 
cars, wood decks, 
patios, outdoor 
furniture, home 
siding, and lawn and 
garden equipment.

4. 

Soap Nozzle (Black)

NOTICE: Only use 
pressure washer–
safe soap.

Use to apply soap 
to cleaning surfaces 
in order to provide a 
thorough cleaning.

1.  Push up the trigger lock to lock it in the OFF 

position (see Figure 24).

2.  Pull the quick coupler toward the spray gun (see 

Figure 25).

3.  Push the nozzle into the coupler and push the 

coupler away from the spray gun (see Figure 25). 
The nozzle will lock into place. Tug on the nozzle to 
verify it is locked in place.

For most cleaning, keep nozzle 8 – 24 in. (20 – 61 cm) 
away from cleaning surface. 
x Damage may occur to the cleaning surface if you 

spray too close, especially with high-pressure 
nozzles.

x When you begin spraying, start farther away and 

move closer to avoid damage to the surface.

x When cleaning tires, allow at least 6 in. (15 cm) 

between a tire and the nozzle. 

Do not get any closer than 6 in. (15 cm). Spraying 
closer than 6 in. (15 cm) may damage tire. 

To relieve system pressure, shut off engine, turn off water 
supply and pull gun trigger until water stops fl owing.