Westinghouse WP2300 Owner's Manual

34 

No or low pressure.

1.   Water supply is low.

1.   Increase the water supply.

2.   Nozzle is obstructed.

2.   Clean the nozzle.

3.   Water fi lter screen is obstructed.

3.   Remove and clean the fi lter.

4.   Water inlet is obstructed.

4.   Clear the inlet.

5.   Inlet hose is kinked or leaks.

5.   Straighten the inlet hose and 

repair leaks.

6.   High-pressure hose is obstructed or 

leaks.

6.   Clear obstructions in the hose 

or replace the hose.

7.   High-pressure hose fi tting leaks.

7.   Tighten the fi tting. Apply 

sealant tape if necessary.

8.   If trying 1-7 above does not solve 

the problem, the cause might be 
that the pressure washer has a fault.

8.   Take the pressure washer to 

your nearest authorized service 
dealer.

Soap does not mix with water spray.

1.  

Soap

 siphon hose is not 

submerged.

1.   Insert the soap siphon 

hose properly into the soap 
container.

2.  

Soap

 siphon hose is obstructed.

2.   Clear obstructions in the soap 

siphon hose.