Westinghouse 15 SEER, 80% AFUE R6GF Gas/Electric Packaged Unit Brochure

•  Copeland Ultra-Tech Scroll Compressor: State of the art, two 

stage compressor is standard equipment. 

•  Quiet  Operation  and  Low  Vibration:  Swept-wing fan blade 

combined with custom Venturi condenser fan orifice.

•  Compressor Sound Blanket: Is standard equipment.  

Hail Guard: A guard that will never rust and protects the units coil 
from being damaged.

 Coil Technology:  For increased resistance against 

formicary corrosion, the number one cause of evaporator coil 
failures.

•  Designed  Using  Galvanized  Steel: With a polyester urethane 

coat finish. The 950 hour salt spray finish is 1.5 mil thick and resists 
corrosion 50% better than comparable units. 

•  Smaller Panels, Great Fit and Finish, Total Seal: Well-designed, 

quality construction. 

•  One Piece Top Pan: With drip edge on top panels whisks away 

rainwater. 

•  Embossed Bottom Pan: Keeps blower component compartment dry.

•  Permanently Lubricated Condenser Motor: A heavy duty PSC 

motor for long lasting reliability and quiet operation.  Requires no 
maintenance and is protected from rain and snow.

•  Thermostatic  Expansion  Valve: Factory installed, externally 

equalized thermostatic expansion valve provides precise refrigerant 
control under varying load conditions.

•  Hi/Low Pressure Switches: Ensure long compressor life. 

•  Externally Accessible, High Flow Service Ports:  Quick access 

to refrigeration system. 

•  Liquid Line Filter Drier: Factory installed at a convenient location 

for service.

•  Two-Stage Heat Operation: Featuring a two stage gas valve and 

2 speed inducer motor. 

•  Choice of Heating Control: Two stage thermostat or single stage 

heating thermostat with on the control board timing of 5 or 10 minute 
delay for second stage of heat.  

•  Low Voltage Transformer:  Includes 5 Amp fuse to protect low 

voltage circuit.

•  Corrosion-Resistant Drain Pan: Quickly drains away evaporator 

condensate.

•  ECM Variable Speed Blower Motor: Advanced technology allows 

the motor to automatically adjust to different static loads. The 
variable speed motor allows for extra quiet operation and improved 
air quality.

•  Heavy-Gauge,  Full  Perimeter  Base  Rails: Facilitates forklift 

handling and curb mounting.

•  Convertible Air Delivery:  Horizontal or downflow to accommodate 

rooftop or horizontal applications.

•  Easy  Compressor  and  Control  Access:  Designed to make 

servicing easier for the contractor, access panels are provided to 
all controls and the compressor from the side of the unit. 

•  Easy  Access: To the evaporator coil for cleaning and general 

maintenance.

•  Removable Top Grille Assembly: Allows ease of service to the 

fan motor.

•  Duct Flanges: Reduce installation costs.

•  Proven,  Industry  Standard  Components:  Easier service and 

availability.

Control Board: Provides extended life to igniters using 

hot surface ignition technology. Programmed to learn the heat-up 
characteristics of the igniter, then adapt the ignition time to the 
characteristics of the furnace so the igniter is energized appropriately.

•  Hot Surface Igniter: Innovative application of an appliance type 

igniter with a 20 year history of reliability.

•  Accessories: Roof curbs and more.

These single packaged gas/electric systems are high 
efficiency self contained heating and cooling units that 
can be installed on the roof or on a slab. The convertible 
unit design makes installations simple in all applications. 
Units are ETL listed.