Weed Eater Weedeater One WE261 User Manual

18

MUFFLER   
Inspect and replace corroded muffler and 

spark arrester (if equipped) as it could create 

a fire hazard and/or dam age.

SPARK PLUG(S) 
Replace spark plug(s) at the beginning of 

each mowing season or after every 100 

hours of operation, whichever occurs first.  

Spark plug type and gap setting are shown 

in “PROD UCT SPEC I FI CA TIONS” section 

of this manual.
CLEANING
•  Clean engine, battery, seat, finish, etc. of 

all foreign matter.

•  Keep finished surfaces and wheels free 

of all gasoline, oil, etc.

•  Protect painted surfaces with au to mo tive 

type wax.

We do not recommend using a garden hose 

or pressure washer to clean your riding 

mower unless the engine and transmission 

are covered to keep water out. Water in en-

gine or transmission will shorten the useful 

life of your riding mower.  Use compressed 

air or a leaf blower to remove grass, leaves 

and trash from riding mower and mower.

CLEAN AIR INTAKE/COOL ING AREAS
To ensure proper cooling, make sure the 

grass screen, cooling fins, and other exter-

nal surfaces of the engine are kept clean 

at all times.
Every 100 hours of operation (more often 

under extremely dusty, dirty conditions), 

remove the blower housing and other cooling 

shrouds. Clean the cooling fins and external 

surfaces as necessary. Make sure the cooling 

shrouds are re in stalled.
NOTE:  Operating the engine with a blocked 

grass screen, dirty or plugged cooling fins, 

and/or cooling shrouds re moved will cause 

engine damage due to overheating.

CLEAN AIR SCREEN
Air screen must be kept free of dirt and chaff 

to prevent engine dam age from overheating.  

Clean with a wire brush or compressed air to 

re move dirt and stub born dried gum fibers.

Your engine will not run properly using a 

dirty air filter.   Replace the air filter every 

100 hours of operation or every season, 

whichever occurs first. Service air cleaner 

more often under dusty conditions.

1.  Remove cover knob and cover.

2.  Carefully remove cartridge.

3.  Clean base carefully to prevent debris 

from falling into carburetor.

4.  Clean by gently tapping on a flat sur-

face.

5. Re 

in stall cartridge, cover and secure with 

cover knob.

NOTE: If very dirty or damaged, replace 

cartridge.

IMPORTANT:  Petroleum solvents, such as 

kerosene, are not to be used to clean the 

cartridge.  They may cause de te ri o ra tion of 

the cartridge.  Do not oil cartridge.  Do not 

use pressurized air to clean cartridge.

Cover Knob

Air Filter

Cover

4.  Refill engine with oil through oil fill dipstick 

tube.  Pour slowly.  Do not overfill.  For 

approximate capacity see “PRODUCT 

SPEC I FI CA TIONS” section of this man u al.

5. Use gauge on oil fill cap/dipstick for 

checking level.  For accurate reading, 

tighten dipstick cap securely onto the 

tube before removing dipstick.  Keep oil 

at “FULL” line on dipstick. Tighten cap 

onto the tube securely when finished.

35

SU CORTADORA DE CÉSPED
Compare las ilustraciones con su cortadora de césped para familiarizarse con las ubicaciones de los 

diferentes controles y a just es.  Conserve este manual para futuras consultas.

Nuestra cortadora de césped cumple con las normas de seguridad aplicables del 

Instituto Nacional Estadounidense de Norm as. 

FORMA - Se usa para activar la cuchilla de la 

cortadora de césped. 
PEDAL DEL FRENO - Se usa para fre nar la 

cortadora de césped y arrancar el motor.
PALANCA DE AJUSTE DE ALTURA - Se usa 

para ajustar la altura de corte de la cortadora 

de césped.
INTERRUPTOR DE ARRANQUE - Se usa para 

arrancar y detener el motor.
ÉMBOLO DE LA PALANCA DEL ELEVADOR - 

Se usa para sol tar la palanca de ajuste de altura 

cuando se cam bia su posición.

PALANCA DE FRENO DE ESTACIONAMIENTO 

- Fija el freno de estacionamiento en la posición 

de freno.
PALANCA DE CONTROL DE MOVIMIENTO - 

Selecciona la velocidad y dirección de la cortadora 

de césped.
CONTROL DE RUEDA LIBRE - Desactiva la 

transmisión para empujar o remolcar despacio 

la cortadora de césped con el motor apagado. 
INTERRUPTOR DEL SISTEMA DE FUNCIO-

CIÓN “ON” - Permite la operación del conjunto 

segador o otro accesorio accionado mientras 

que en revés.

Interruptor de 

arranque

Palanca de 

control de 

movimiento

Émbolo de la 

palanca del 

elevador

Control de 

rueda libre

Palanca de 

ajuste de 

altura

Palanca del 

embrague de la 

plataforma

Pedal del freno

Pedal del freno de 

estacionamiento

(ROS) en 

posición “on”