Weed Eater 186849 Owner's Manual

Page of 48
14
MAINTENANCE
BEFO
RE EAC
H USE
T
R
A
C
T
0
R
Inspect Muffler/Spark Arrester
Lubrication Chart
Check Brake Operation
Clean Air Filter
Change Engine Oil (with oil filter)
Replace Air Filter Paper Cartridge
Replace Spark Plug
Check Battery Level
Check Tire Pressure
Clean Battery and Terminals
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
MAINTENANCE SCHEDULE
EVERY 8 HOURS
EV
ER
Y 2
5 H
OU
RS
EV
ER
Y 5
0 H
OU
RS
EV
ER
Y 1
00
 H
OU
RS
EV
ER
Y S
EA
SO
N
SERVICE DATES
Check for Loose Fasteners
BEFORE STORAGE
Check Engine Oil Level
Clean Engine Cooling Fins
Sharpen/Replace Mower Blades
Check Operator Presence and
Interlock Systems
Clean Air Screen
1 - Change more often when operating under a heavy load or
     in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
E
N
G
I
N
E
Replace Oil Filter (If equipped)
Check Transaxle Cooling
Check V-Belts
Replace Fuel Filter
3
2
2
2
2
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-lbs. maximum.  
      Do not overtighten.
1
,
1,2
2
4
5
Change Engine Oil (without oil filter)
1,2
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have 
been subjected to operator abuse or negligence.  To receive 
full value from the warranty, operator must main tain tractor 
as instructed in this manual.
Some adjustments will need to be made periodically to 
properly maintain your tractor.
All adjustments in the Service and Adjustments section 
of this manual should be checked at least once each 
season.
•      Once a year you should replace the spark plug, clean 
or replace air fi lter, and check blades and belts for wear.  
A new spark plug and clean air fi lter assure proper air-
fuel mixture and help your engine run better and last 
longer.  
BEFORE EACH USE
•      Check engine oil level.
•      Check brake operation.
•      Check tire pressure.
•      Check operator presence and 
       interlock systems for proper operation.
•      Check for loose fasteners.
LUBRICATION CHART
d
SPINDLE ZERK 
d
FRONT WHEEL
BEARING  ZERK
c
SAE 30 OR 10W30 MOTOR OIL
d
GENERAL PURPOSE GREASE
e
REFER TO MAINTENANCE “ENGINE”  SECTION
IMPORTANT:  DO NOT OIL OR GREASE THE PIVOT POINTS WHICH 
HAVE SPECIAL NYLON BEARINGS.  VISCOUS LU BRI CANTS WILL 
ATTRACT DUST AND DIRT THAT WILL SHORT 
EN THE LIFE OF 
THE SELF-LU 
BRI CAT ING BEARINGS.  IF YOU FEEL THEY MUST 
BE LU BRI CAT ED, USE ONLY A DRY, POW DERED GRAPHITE TYPE 
LU BRI CANT SPARINGLY.
d
SPINDLE ZERK 
d
FRONT WHEEL 
BEARING  ZERK
e
ENGINE
c
GEARSHIFT 
PIVOTS