Wayne 390601-001 Leaflet

For one year from the date of purchase, Wayne Water Systems (“Wayne”) will repair or replace, at its option, for 
the original purchaser any part or parts of its Sump Pumps or Water Pumps (“Product”) found upon examination 
by Wayne to be defective in materials or work­manship. Please call Wayne (800-237-0987) for instructions or see 
your dealer. Be prepared to provide the model number when exercising this warranty. All transportation charges 
on Products or parts submitted for repair or replacement must be paid by purchaser.
This Limited Warranty does not cover Products which have been damaged as a result of accident, abuse, misuse, 
neglect, improper installation, improper maintenance, or failure to operate in accordance with Wayne’s written 
instructions.
THERE  IS  NO  OTHER  EXPRESS  WARRANTY.  IM­PLIED  WARRANTIES,  INCLUDING  THOSE  OF  M­ERCHANT­
ABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE,  ARE  LIM­ITED  TO  ONE  YEAR  FROM­  THE  DATE  OF 
PURCHASE. THIS IS THE EXCLUSIVE REM­EDY AND ANY LIABILITY FOR ANY AND ALL INDIRECT OR CONSE­
QUENTIAL DAM­AGES OR EXPENSES WHATSOEVER IS EXCLUDED.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusions or 
limitations of incidental or consequential damages, so the above limitations might not apply to you. This limited 
warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state.
In  no  event,  whether  as  a  result  of  breach  of  contract  warranty,  tort  (including  negligence)  or  otherwise,  shall 
Wayne  or  its  suppliers  be  liable  for  any  special,  consequential,  incidental  or  penal  damages  including,  but  not 
limited to loss of profit or revenues, loss of use of the products or any associated equipment, damage to associated 
equipment, cost of capital, cost of substitute products, facilities, services or replacement power, downtime costs, or 
claims of buyer’s customers for such damages.
You M­UST retain your purchase receipt along with this form. In the event you need to exercise a warranty claim,  
you M­UST send a copy of the purchase receipt along with the material or correspondence. Please call Wayne 
(800-237-0987) for return authorization and instructions.

DO NOT M­AIL THIS FORM­ TO WAYNE. Use this form only to maintain your records.

MODEL NO._______________ SERIAL NO.__________________________ 

  

INSTALLATION  DATE_____________

Operating Instructions

4

© 2007 Wayne Water Systems

The FloodAlert control uses patented 
electronic surface transfer (EST) to 
detect the presence of water. Sensing 
is not affected by oil, soaps, turbulence 
or the waters resistance and is 
intrinsically safe.
When water touches the tip of 
FloodAlert’s sensing wire, a relay closes 
turning on your pump. Patent pending 
Zcross technology closes the relay 
contact at zero volts and opens it at 
zero current. This stops relay arcing, 
extending relay life, stopping power-
line flick­er, and mak­ing pump startups 
smoother. 
A settable “Run Timer” allows you to 
change the pumping depth without 
opening the sump pump pit. This 
timer allows any quantity of water to 
be pumped out of the sump and can 
even pump it completely dry without 
running the pump too long. 
If the water level does not fall below 
the tip of the wire while the pump is 
running an alarm sounds indicating 
high water pump failure or a clogged 
discharge line. Two lights alternately 
flash, warning you of a problem before 
your basement floods. A standard 9-
volt battery operates the alarm during 
a loss of power at the wall outlet. 
The battery maintains the sensor and 
alarm for two days without power. 
Circuitry maintains the battery voltage 
extending its shelf life to 7-years.
Use FloodAlert to convert your manual 
pump to automatic or to replace a 
defective float switch. FloodAlert 
requires a grounded pump plug 
or, alternatively, a grounded 
connection to the sump. It will not 
apply 120­volts to the pump motor 
without proper grounding.

This manual contains information 
that is very important to k­now and 
understand. This information is 
provided for SAFETY and to PREVENT 
EQUIPMENT PROBLEMS. To help 
recognize this information, observe 
the following symbols.

390601-001  6/07

After unpack­ing the unit, inspect 
carefully for any damage that may 
have occurred during transit. Mak­e 
sure to tighten fittings, bolts, etc., 
before putting unit into service.

For parts, product & service information

visit www.waynepumps.com