UTStarcom PPC 6700 User Manual

Getting Started 

|

 11

Use the stylus to write, draw, or select items on the touch screen.

Allows you to capture images even in a dark environment. To turn on 
the flash, tap the Flash icon ( 

 ) when in Camera mode.

The camera lens on your device supports two shoot modes: 

angle mode (normal) and Macro mode (close-up). To change the 

shoot mode, push the switch up for wide-angle mode ( 

 ) or down 

for macro mode ( 

 ).

You can connect your device to an external antenna to utilize the 

superior reception quality (if available).

Position your device until this mirror reflects the image you want to 

capture.

With the stylus, press the Reset button to soft-reset your device.

Use this connector for synchronizing data or recharging the battery.

Allows you to listen to audio media or use the phone’s hands-free kit.

Speak into the microphone when receiving or making a phone call or 

voice recording.

Press and hold for two seconds to launch Camera mode. When in 

Camera mode, press this button to take a picture.

Recharge the device battery.

Plug into the cradle or directly into the device to recharge the battery.

Pick up and hang up incoming and outgoing calls.

Allows you to recharge your device and the second battery (if you 

have purchased one), as well as using ActiveSync to synchronize 

data between your device and the PC.

•

  To recharge the device (or battery), connect the cradle to the 

electrical outlet.

•

  To synchronize, connect the cradle to the USB port on your PC.