Sterling Home Theater Server 882.000254.00 User Manual

7/50D Plus or 7/50D Controller 

Chapter 3:  Installation 

30 

Make sure that all previous installation steps have been done first before starting this task. 
You’ll use two yellow patch cords to connect. 

To connect a vacuum pump to the network: 

1.  Attach one connector of the first yellow patch cord to the lower terminal on the 

vacuum pump terminal box. Tighten the cord grip ring until snug. 

2.  Attach the other connector to the upper left terminal of the ArmorBlock. Tighten the 

cord grip ring until snug. 

3.  Attach one connector of a yellow patch cord to the upper terminal on the vacuum 

pump terminal box. Tighten the cord grip ring until snug. 

4.  Attach the other connector to the upper right terminal of the ArmorBlock. Tighten 

the cord grip ring until snug. 

Note the following illustration for 4-connector ArmorBlocks: 

 

 

 

5.  Dress the excess patch cord cables with cable ties so they do not interfere with 

operation and to give a pleasing appearance.