Sterling Home Theater Server 882.000254.00 User Manual
7/50D Plus or 7/50D Controller
Chapter 3: Installation
47
Setting Up Pumps
Before starting the system, you must define several settings for each pump, such as how
quickly to shut it down when it is not in use and whether the pump has a local alarm. This
section first discusses how to use the controller’s menu system to configure pumps. The table
on pp. 78–79 discusses the individual choices.
Before starting the system, you must define several settings for each pump, such as how
quickly to shut it down when it is not in use and whether the pump has a local alarm. This
section first discusses how to use the controller’s menu system to configure pumps. The table
on pp. 78–79 discusses the individual choices.
Setting Up a Single Pump
1. Go to the Pump Summary screen.
To reach this screen from any other screen, touch Pumps on the right side of the
screen. The Pump Summary screen appears:
screen. The Pump Summary screen appears:
2. Touch the icon for the pump you want to set up, and hold it for several seconds.
The Pump n Setup screen appears: