Philips AZT9230 User Manual

At the set alarm time either the tuner will start playing for 1 hour, the beeper will
come on for 3 minutes or an entire CD will be played.

1 Keep SET· pressed for approximately 2 seconds, then 

briefly press SET· twice.

y

Either ALbEEP, ALCd or ALtun is displayed.

2 Press 

3 or 4 if necessary repeatedly within 

5 seconds to select the desired alarm signal until the
display shows either:
ALbEEP

: the beeper will be the alarm signal, 

ALCd

: the CD will be the alarm signal, or 

ALtun

: the tuner will be the alarm signal.

y

At the set time 

starts flashing and the 

selected alarm signal will come on.

• You can deactivate the beeper for 24 hours by

pressing any key on the player.

• If you deactivate the alarm function by switching CD or 

tuner play off with 

9, CD or tuner play will restart 

after 24 hours.

• To switch the alarm function on or off, 

keep ESP pressed for approximately 2 seconds.

y

is shown if the alarm function is on.

Notes: – If there is no CD inserted or no radio station tuned, 

the beeper will be taken as the alarm signal instead.

– The alarm can only be heard if you disconnect the 

headphones, and either connect speakers to the player, 
or select the beeper as the alarm signal.

AZT9230/01.1 eng  30/10/00  11:03  Page 24