Philips FW-C80 User Manual

3139 116 19662 (ENG)

TIMER

SLEEP TIMER

Sleep

(only on remote control)

This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.

1 Press SLEEP on the remote control

repeatedly to select a period of time.
™ The selections are as follows (time

in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™

60 …

™ "SLEEP XX" or "OFF" will be

displayed. "

XX" is the time in

minutes.

2 When you reach the desired length

of time, stop pressing the

SLEEP

button.
™ After this amount of time passes,

the system will switch to the
standby mode.

To switch off the Sleep Timer
• Press

SLEEP repeatedly until "

OFF"

is displayed, or press the
STANDBY ON button.

5 Press CLOCK/TIMER again to

store the setting.
™ The clock starts.

• To exit without storing the setting,

press Ç on the system.

Notes:
– During clock setting, if no button is

pressed within 90 seconds, the system
will exit clock setting mode
automatically.

– When a power interruption occurs, the

clock setting is erased.

Timer Setting

• The system can switch on to CD,

TUNER, or TAPE 2 mode
automatically at a preset time. It can
serve as an alarm to wake you up.

• Before setting the timer, make sure

the clock is set correctly.

• The timer will always be switched on

once it is set.

• The volume of the timer will

increase from the minimum
level until the volume level
before the set is switched to
standby mode.

1 Press and hold CLOCK/TIMER for

more than two seconds to select
timer mode.
™ "AM 12:00" or "00:00" or the

last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.

™ The

TIMER

starts flashing.

™ The selected source is lit while

other available sources are
flashing.

2 Press CD, TUNER or TAPE to

select the desired source.

• Before selecting CD or TAPE, make

sure a CD or tape is loaded in the
CD tray or tape deck 2.

3 Press␣ à or á on the system to

set the hour for the timer to start.

4 Press␣ í or ë on the system to

set the minute for the timer to start.

5 Press CLOCK/TIMER to store the

start time.
™ The timer is now set.
™ The

TIMER

remains on the display.

• At the preset time, the timer will be

activated.
™ The selected source will be

played.

Notes:
– During timer setting, if no button is

pressed within 90 seconds, the system
will exit timer setting mode
automatically.

– If the source selected is TUNER, the

last tuned frequency will be switched
on.

– If the source selected is CD, playback

will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead.

– If the source selected is TAPE, and if

the preset time is reached during high
speed dubbing, the TUNER will be
selected instead.

– The timer will not activate if a recording

is in progress.

To switch off the TIMER
• Press TIMER ON/OFF on the

remote control.
™ The timer is now switched off.
™ The display will show "CANCEL"

and the

TIMER

disappears.

To start the TIMER again (for the
same preset time and source)
• Press TIMER ON/OFF on the

remote control.
™ The timer is now on.
™ The

TIMER

appears on the display.

pg 01-28/C80/37-Eng

2/16/00, 9:06 AM