Trendnet TEW-P1P User Manual

1. Click Reset button just like a picture ＜

＞

. 

 
2. Reset allows the user to reset the print server device in order to establish a new 

connection or for new settings to take effect. 

 

 
Refresh

1. Click Refresh button just like a picture ＜

＞

. 

 
2. Refresh searches the network for all attached print server(s).   
 
 
Note:   Configure the print speed in the Advanced label, must match the printer’s speed 

which connect to the print server. Undependable configuration will cause printer to 
abnormal printing. 

 
 
Multiple Print Queues Configuration 

 

To configure the print server to service multiple print queues, please follow the instructions 
listed below: 
 
1.  Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 
2. Run 

the 

PSAdmin from your Windows. 

3.  Select the print server and to be configured. 
4. Click 

the 

Wizard icon in the tool bar. 

5.  Type in a Print server and a Print Queue Name (For more detailed information about 

Wizard, please refer to the “Wizard” section in this chapter). 

6.  Run the NetWare’s PCONSOLE and create additional print queues. 
7.  Select the Print server name you specify in Step 5. 
8.  Select the “Print server Configuration” option and select the ”Queue Serviced by 

Printer” option (For NetWare 4.x’s PCONSOLE, please select “Printers” option and 
select “Printer 0” instead). 

9.  Select the “Printer 0” and press the [Insert] key to add the print queues you create in 

Step 6 into the list (For NetWare 4.x’s PCONSOLE, please select “Print queues 
assigned” option instead). 

10. Reset the print server by clicking the “Reset” icon from the PSAdmin. Done. 

                                                                                            25