Trendnet TEW-P1P User Manual

 

If you had problems to setup your print server in your wireless network, please refer to the 

following steps: 

1.  Change the print server to diagnostic mode by switching the DIP switch to DIAG 

mode(the side near to power connector.) 
 

2.  Change your wireless adapter to 802.11b Ad-hoc mode, and the ESSID is WLAN-PS 

 

3. Run PSAdmin to discover the print server. 

 

4.  Select the wireless print server 

 

 

 

5. Select wireless and input the ESSID, Channel, Rates that meet your network 

environment, then press ok. 

 
 

                                                                                            77