TP-LINK TL-SC3430N User Manual
35
¾
Use the following IP address: Select this option when the fixed IP address is set.
z
IP address: Enter the IP address of the device.
z
Subnet mask: Enter the subnet mask.
z
Default gateway: Enter the default gateway.
¾
Use the following DNS server address: Select this when you set the fixed address as the IP
address of DNS server.
address of DNS server.
z
Primary DNS server: Enter the IP address of the primary DNS server.
z
Secondary DNS server: Enter the IP address of the secondary DNS server, if necessary.
¾
HTTP Port Number: Select 80 in general situations. If you want to use a port number other than
80, select the text box and enter a port number between 1024 and 65535.
80, select the text box and enter a port number between 1024 and 65535.
z
When you have set the HTTP port number to a number other than 80 on the Network
Setting screen in the Setup Program, access the device by typing the IP address of the
device on the web browser as follows: Example: when HTTP port number is set to 2000
Setting screen in the Setup Program, access the device by typing the IP address of the
device on the web browser as follows: Example: when HTTP port number is set to 2000
)
Note:
1)
The IP Camera needs to be rebooted after it finishes changing the network setting completely.
2)
If you connect the IP Camera with your computer directly, the default network domain of camera is
192.168.1.xx
192.168.1.xx
6.3.2 PPPoE
If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE
information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification
function at same time.
information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification
function at same time.