Linksys Phine adapter with router SPA2102 User Manual

Phone Adapter with Router

20 

Set the Mode 201 Press 0 to select the 

router/NAT mode.
Press 1 to select the 
bridge/switch mode.

If the Phone Adapter acts as the router for 
your network, use the router/NAT mode.

If your network already has a router, use the 
bridge/switch mode.

Enable/Disable WAN 
Access to the 
Web-based Utility

7932 Press 1 to enable.

Press 0 to disable.

Use this setting to enable or disable WAN 
access to the Web-based Utility. (This Utility 
lets you configure the Phone Adapter.)

Manual Reboot 732668 After you hear, “Option successful,” hang up 

the phone. The Phone Adapter will 
automatically reboot.

Factory Reset 73738 Press 1 to confirm.

Press * (star) to cancel.

If necessary, enter the password. The Phone 
Adapter will request confirmation; enter 1 to 
confirm. You will hear, “Option successful.” 
Hang up the phone. The Phone Adapter will 
reboot, and all settings will be reset to their 
factory default settings.

NOTE: This feature may be 
protected by a password 
available only from 

babyTEL.

If you need to enter a password, 
refer to the following section, 
“Entering a Password.”