Link electronic LEI-547 Leaflet
500 SERIES
LINK ELECTRONICS, INC.
AES/EBU DIGITAL AUDIO TO ANALOG
MODEL LEI-547
FEATURES
18 BIT DAC
AES-EBU Audio DA
Stand-alone
Four Outputs AES3-ID
Two Stereo Analog Outputs
Error Detection
Transformer Coupled Digital I/O
FP Select BNC/Terminal Input
Monitoring Distribution
The LEI-547 accepts either AES3-1992 or AES3-
ID inputs and provides a total of four outputs of
digital audio to AES3-ID specifications. In addition,
it provides two sets of balanced low impedance
analog outputs. Transformer coupled digital inputs
and outputs are standard to eliminate the
possibility of ground loops. Captive screw terminal
blocks are used for the AES3-1992 while AES3-ID
use BNC connectors.
ID inputs and provides a total of four outputs of
digital audio to AES3-ID specifications. In addition,
it provides two sets of balanced low impedance
analog outputs. Transformer coupled digital inputs
and outputs are standard to eliminate the
possibility of ground loops. Captive screw terminal
blocks are used for the AES3-1992 while AES3-ID
use BNC connectors.
A front panel switch selects between BNC or
screw terminal, (AES3-ID, AES3-1992). Sample
rate LED’s show three rates, 48KHz, 44.1KHz and
32KHz. An error detection LED indicates any
errors on the incoming signal. An AC power switch
on the front panel allows the user to turn the unit
on or off at will. The fuse is on the front panel for
easy access..
screw terminal, (AES3-ID, AES3-1992). Sample
rate LED’s show three rates, 48KHz, 44.1KHz and
32KHz. An error detection LED indicates any
errors on the incoming signal. An AC power switch
on the front panel allows the user to turn the unit
on or off at will. The fuse is on the front panel for
easy access..
The analog conversion is accomplished using a 1-
BIT Delta-Sigma converter with 18-BIT resolution.
The output cells employ a unique cross-coupled
design for precise amplitude and phase matching.
The digital signal path uses state-of-the-art
integrated circuits. The data is re-sliced and re-
clocked for jitter attenuation. Sample rate is
automatically detected and indicated by front panel
LEDs. Data errors are also detected and reported
by a red LED on the front panel.
BIT Delta-Sigma converter with 18-BIT resolution.
The output cells employ a unique cross-coupled
design for precise amplitude and phase matching.
The digital signal path uses state-of-the-art
integrated circuits. The data is re-sliced and re-
clocked for jitter attenuation. Sample rate is
automatically detected and indicated by front panel
LEDs. Data errors are also detected and reported
by a red LED on the front panel.
The 500 series is housed in the same case as the
well accepted 700 series. A black front panel
distinguishes between the two series. Three 500 or
700 series can be mounted in the PRT-700 rack
tray.
well accepted 700 series. A black front panel
distinguishes between the two series. Three 500 or
700 series can be mounted in the PRT-700 rack
tray.
LINK
ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
MADE IN THE USA