EXP Computer PathBuilder S200 User Manual
Bridging
79
T0008-16F
Release 5.2M
Bridge Filtering
Configuring
NetBIOS Name
Filtering
NetBIOS Name
Filtering
To access the NetBIOS Name Filter Action parameter, follow the steps below:
Parameter
The NetBIOS Name Filter Action parameter is in the Bridge Link Parameters record.
Step
Action
Result
1
Select
Configure -> Configure
Bridge -> Bridge Link
Parameters
Parameters
from the CTP Main
menu.
Entry Number 1 appears.
Note
The table has one entry for each
logical bridge link in the bridge
node. Bridge Link Entry 1 is
reserved for the primary LAN
interface. The WAN bridge links
start at entry 5.
logical bridge link in the bridge
node. Bridge Link Entry 1 is
reserved for the primary LAN
interface. The WAN bridge links
start at entry 5.
2
Enter the number of the link that
you are defining and complete the
NetBIOS Name Filter Action
parameter using the description in
the Parameters section that follows.
you are defining and complete the
NetBIOS Name Filter Action
parameter using the description in
the Parameters section that follows.
NetBIOS Name Filter Action
Range:
PASS, BLOCK, NONE
Default:
NONE
Description:
When using NetBIOS Name Filters, set the NetBIOS Name Filter
Action to BLOCK on Bridge Link 1 (the LAN link). Then define
the NetBIOS Name Filter Table records with patterns for each of
the server names that you want to access.
Action to BLOCK on Bridge Link 1 (the LAN link). Then define
the NetBIOS Name Filter Table records with patterns for each of
the server names that you want to access.
• PASS — Passes all frames with a NetBIOS name that is not
listed in the NetBIOS Name Filter Table.
• BLOCK — Blocks all frames with a NetBIOS name that is
not listed in the NetBIOS Name Filter Table.
• NONE — Indicates no NetBIOS name filtering for the link.