CyberPower Battery Charger CPBC6200AC Leaflet

• USB Battery Pack (CPBC5200AC Series)

• User Guide

Battery Capacity: 5200mA

Rated Input: AC 100~240V, 50/60Hz 0.4A

Rated Output: DC 5V 2.1A (Max.)

PC Charging time: ~6 Hours

Dimension: 4.26x2.2x0.96 inch

Weight: 5.93 oz

Storage: 14 to 122°F (-10 to 50°C)

Operation: 32 to 104˚F (0 to 40˚C)

Charge the USB Battery Pack by putting the plug into an AC 

socket. When charging the battery pack, the LED indicator will 

light up automatically. Press the button to turn it off and press 

it again to switch the LED indicator on. Recharge the 

CPBC5200AC Series every 3 months when not in use to 

maintain peak battery performance. The battery capacity may 

decline after 300 charging cycles.

Before using the USB Battery Pack, please read the following 

warnings carefully. Use the product according to the 

procedures described in this manual. Failure to follow these 

safety precautions may result in fire, explosion, electrical shock 

or other dangers

1. Store between 14 to 122°F (-10 to 50°C).Operate between 

32 to 104°F(0 to 40°C).

2. Do not immerse this product in water or other liquids, as 

such use may result in fire or electrical shock. If water or 

other liquids enter the battery interior, unplug the product 

immediately from any attached power source or device.　

3. Do not use this product with wet hands. Moisture in or on 

this product may result in electrical shock.

4. Store this product in a cool and dry environment when not in use.

5. Do not puncture this product. Puncturing the battery may 

cause the release of harmful substances.

6. It is normal for the USB Battery Pack to become warm 

during charging.

7. Ensure that all users read these warnings and instructions 

before using.

8. Please recycle USB Battery Pack in accordance with local 

environmental laws and regulations

9. Do not dismantle, open or shred secondary cells or batteries.

10. Do not expose cells or batteries to heat or fire. Avoid storage 

in direct sunlight.

11. Do not short-circuit a cell or a battery. Do not store cells or 

batteries haphazardly in a box or drawer where they may 

short-circuit each other or be short-circuited by other metal 

objects.

12. Do not remove a cell or battery from its original packaging 

until required for use.

13. Do not subject cells or batteries to mechanical shock.

14. In the event of a cell leaking, do not allow the liquid to come 

in contact with the skin or eyes. If contact has been made, 

wash the affected area with copious amounts of water and 

seek medical advice.

15. Do not use any charger other than that specifically provided 

for use with the equipment.

16. Observe the plus (+) and minus (–) marks on the cell, battery 

and equipment and ensure correct use.

17. Do not use any cell or battery which is not designed for use 

with the equipment.

18. Do not mix cells of different manufacture, capacity, size or 

type within a device.

19. Keep cells and batteries out of the reach of children.

20. Seek medical advice immediately if a cell or a battery has 

been swallowed.

21. Always purchase the correct cell or battery for the equipment.

22. Keep cells and batteries clean and dry.

23. Wipe the cell or battery terminals with a clean dry cloth if 

they become dirty.

24. Secondary cells and batteries need to be charged before 

use. Always use the correct charger and refer to the 

manufacturer’s instructions or equipment manual for proper 

charging instructions.

25. Do not leave a battery on prolonged charge when not in use.

26. After extended periods of storage, it may be necessary to 

charge and discharge the cells or batteries several times to 

obtain maximum performance.

27. Secondary cells and batteries give their best performance 

when they are operated at normal room temperature (20 

°C ± 5 °C).

28. Retain the original product literature for future reference.

29. Use only the cell or battery in the application for which it 

was intended.

30. When possible, remove the battery from the equipment 

when not in use.

31. Dispose of properly.

This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC 

rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This 

equipment generates uses and can radiate radio frequency 

energy and if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference 

by one or more of the following measures:

– Increase the separation between the equipment 

and receiver.

– Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

If the LED indicator extinguishes automatically during the 

charging process, press the button to revert.

Changes or modifications not expressly approved by the 

party responsible for compliance with the FCC Rules could 

void the user’s authority to operate this equipment.

CyberPower offers limited product warranty for the hardware 

of the USB Battery Pack and the product is free from material 

and manufacturing defects for one year.  A reasonable 

purchase proof with date must be provided when submission. 

CyberPower's sole responsibility is to repair or replace the 

product if a material or manufacturing defect results in 

product failure during its normal use. The warranty is void if 

the product is damaged due to abuse, alteration, misuse, 

negligence, incorrect voltage supply, air/water pollution, 

accidents and natural disasters.

The USB Battery Pack (CPBC5200AC Series) is a high 

capacity rechargeable lithium battery designed for 

powering up to two mobile devices such as phones, MP3 

players, tablets, and handheld gaming devices while away 

from other power sources

- Compact and portable design

- Dual output

- Built in AC plug

- Battery life indicator

© 2013 CyberPower Systems, Inc. 

All rights reserved. Reproduction in whole or in part without permission is prohibited.

Model: CPBC5200AC Series

K09-0000172-00

1

2

3
4
5

Power on/ LED Indicator Switch
Power Off 

LED Battery Life lndicator 

USB Output Port 1*
USB Output Port 2
AC Input Plug

Press the button
Press and hold for 3 seconds
As the “LED INDICATOR”
table showing

5V/ 2.1A (Max.) USB output

AC 100~240V, 50/60Hz, 0.4A

1

2
3

Battery Life Indicator

Overload
Low Battery

Four LEDs represent 25%,
50%, 75% and 100% battery
life from left to right side. 
All four LEDs flash simultaneously.
The first LED light flashes rapidly.

USB Battery
pack does
not recharge

1.Incorrect connection 

between charger and 

USB Battery Pack.

2.No power from the 

source.

Re-attach the USB connector 

to the socket.

Check that power is provided 

USB Battery
Pack does
not power
the device

1.The device is drawing 

too much power.

2.The battery is out     

of power

Check the power specification 

of the device before charging 

with the CPBC5200AC Series.
Charge the battery pack.

*Charge tablets and Apple devices through USB Output Port 1 to achieve fast charging.

1

2

3

4

5

Note: 

1. The LED indicator will automatically switch off 5 seconds 

after pressing the button.

2. When the battery pack is connected to the power, the LED 

indicator will light indicating the charging status. Press the 

button to switch off the indicator and press the button again 

to switch it back on.

4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A. 

TEL: (952) 403-9500    Toll-Free: (877) 297-6937

FAX: (952) 403-0009    E-mail: tech@cpsww.com