GE GE1101P User Manual

chapter 6 _________________________________________________________________ 55

 No on-screen display

The OFF setting is selected for OSD Display; select ON in the Setup menu.

Play doesn’t begin when

The rating level has been set and the disc is subject to that restriction.

a title is selected

No forward or reverse scan

Some DVDs have sections that prohibit rapid scanning, or title and chapter skip.

Disc won’t play

• Both the player and the DVD is coded by region. If the regional codes don’t
    match, the disc cannot be played. This player is Region No. 1. Check the disc
    code.
• Verify that the disc is a type that this player can read. See page 22.
• Clean the disc.
• Try another disc to see if the disc that won’t play is bad.

Desired angle cannot be changed

Some DVDs do not have the multi-camera angle system, and some discs have it
only on certain portions.

Picture is not displayed

Make sure the TV SCREEN feature in the Setup menu is set correctly for

with correct aspect ratio

your television.

Forgot Rating Limit Password

With the power on, press and hold the STOP and PLAY/PAUSE buttons on the
player. This resets the password feature and all other settings to the initial factory
settings. You may be required to select a menu language the next time you power
up.

Cannot copy discs to video tape

This player is equipped with anticopy protection.

“will not read disc” or

Turn the player off and unplug it to reset the DVD player. Wait approximately 2

other error message

minutes, plug the player back in and turn it on.

Subtitle and/or audio

l

language is not the one
selected from the initial
setting

If the subtitle and/or audio language does not exist on the disc, the
initial settings will not be seen/heard. The disc’s priority language is selected
instead. Set the subtitle and or audio language initial setting manually.