Behringer Europack UB1832FX-Pro Specification Sheet

Page of 3
3
EURORACK UB1832FX-PRO Technical Specifications
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those  
listed or illustrated
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss 
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers 
only. Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or 
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2011 MUSIC Group IP Ltd. 
Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
Frequency Response
Microphone input to main out
<10 Hz - 90 kHz 
+0 dB / -1 dB
<10 Hz - 160 kHz 
+0 dB / -3 dB
Stereo Inputs
Type 
1/4" TRS connector,  
electronically balanced
Impedance 
approx. 20 kΩ 
Max. input level 
+22 dBu 
EQ Mono Channels
Low 
80 Hz / ±15 dB
Mid 
100 Hz - 8 kHz/ ±15 dB
High 
12 kHz/ ±15 dB
EQ Stereo Channels
Low 
80 Hz / ±15 dB
Low Mid  
500 Hz / ±15 dB
High Mid 
3 kHz / ±15 dB
High 
12 kHz / ±15 dB
Aux Sends
 
Type 
1/4" TS connector, unbalanced
Impedance 
approx. 120 Ω 
Max. output level 
+22 dBu
Stereo Aux Returns
Type 
1/4" TRS connector,  
electronically balanced
Impedance 
approx. 20 kΩ bal. / 10 kΩ unbal.
Max. input level 
+22 dBu
Main Outputs
Type 
1/4" TS connector unbalanced
Impedance 
approx. 240 Ω balanced / 
120 Ω unbalanced
Max. output level 
+22 dBu
Control Room Outputs
Type 
1/4" TS connector unbalanced
Impedance 
approx. 120 Ω 
Max. output level 
+22 dBu
Headphones Outputs
Type 
1/4" TRS connector, unbalanced
Max. output level 
+19 dBu / 150 Ω (+25 dBm)
DSP 24-bit
Converter 
24-bit Sigma-Delta,  
64/128-times oversampling
Sampling rate 
40 kHz
Main Mix System Data
2
Noise
Main mix @ -∞,  
-101 dB 
Channel fader @ -∞
Main mix @ -0 dB,  
-93 dB 
Channel fader @ -∞
Main mix @ 0 dB,  
-81 dB 
Channel fader @ 0 dB
Power Supply
Mains voltage 
100 to 240 V~, 50/60 Hz
Power consumption 
43 W
Fuse 
100 - 240 V~: T  1.6 A  H  250 V
Mains connection 
Standard IEC receptacle
Physical/Weight
Dimensions (H x W x D) 
approx. 3.5 x 16.9 x 14"   
approx. 90 x 430 x 355 mm
Weight (Net) 
approx. 11.7 lbs / 5.3 kg
Measuring conditions:
1:  1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2:   20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix; 
channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.