Bunn ITB Owner's Manual

USER NOTICES

Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should

be kept in good condition. Replace any unreadable or damaged labels.

For 120/208V or 120/240 volt operation,
replace Power Supply Cord only with
Bunn-O-Matic part number 01699.0000.

CAUTION

#34072.0000 ITCB

#03408.0000

#03409.0000

As directed in the International Plumbing Code of the

International Code Council and the Food Code

Manual of the Food and Drug Administration (FDA),

this equipment must be installed with adequate

backflow prevention to comply with federal, state

and local codes. For models installed outside the

U.S.A., you must comply with the applicable Plumb-

ing /Sanitation Code for your area.

#00986.0000 ITCB

WARNING

• DO NOT OVERLOAD CIRCUIT.

• ALWAYS ELECTRICALLY GROUND

THE CHASSIS.

• DO NOT DEFORM PLUG OR CORD.

• FOLLOW NATIONAL AND LOCAL

ELECTRICAL CODES.

• KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT

37881.0000

#00658.0000

#00656.0001

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

Incorrect programming could result in accidental dispens-

ing of HOT LIQUID.

Trained personnel are to follow instructions provided for

software programming.

Use of additional graphic layer requires disabling of

appropriate switches.

Read all instructions for additional graphic layer prior to

installing and programming.

! WARNING

#39175.0000

36748.3 112912

#00831.0000 ITB

Make su

re Funnel i

s rotated and align

ed with Make sure Funnel is rotated and alig

ned with

Tea Disp

enser on th

e RIGHT side to avo

id Tea Dispenser on the LEFT side to

avoid

potentia

l burns and

water spills. RIGH

T potential burns and water spills.

LEFT

WARNING

HOT LIQUIDS

#41995.0000 ITB DD

WARNING

Fill water tank before turning - on -

thermostat or connecting appliance

to power source.

Use only on a properly protected

circuit capable of the rated load.

Electrically ground the chassis.

Follow national/local electrical codes.

Do not use near combustibles.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE, OR SHOCK HAZARD

READ THE ENTIRE OPERATING MANUAL

BEFORE BUYING OR USING THIS PRODUCT

THIS APPLIANCE IS HEATED WHENEVER

CONNECTED TO A POWER SOURCE

#00824.0002

Risk of Fire. Use a UL listed grounding

type attachment plug, rated 125/250
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.

#38125.0000 TWIN