Wayne 352001-001 User Manual

Page of 4
Operating Instructions & Parts Manual  
RUP160
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 
property damage! Retain instructions for future reference.
For parts, product & service information
visit www.waynepumps.com
REMINDER: Keep your dated proof of purchase for warranty purposes! 
Attach it to this manual or file it for safekeeping.
352001-001 8/09
© 2009 Wayne Water Systems
Submersible  
Utility Pump
General Safety Information
CalIfORnIa PROPOSItIOn 65
 
This product or  
  its power cord may 
contain chemicals, including lead, known 
to the State of California to cause cancer 
and birth defects or other reproductive 
harm. Wash hands after handling. 
GeneRal Safety
•    Read all manuals included
with this product 
carefully. Be thoroughly
familiar with the controls
and the proper use of the 
equipment. Follow all instructions.
•    Only persons well acquainted with
these rules of safe operation should
be allowed to use the unit.
 
Do not  
  pump 
flammable or explosive 
fluids such as gasoline, fuel 
oil, kerosene, etc. Do not 
use in a flammable and/or explosive 
environment. Pump only clear water. 
Personal injury and/or property damage 
will result.
 
Risk of  
  electric 
shock! This pump has not 
been tested for use in 
swimming pool or marine 
areas. Never place pump in pools while 
people are in the water. 
 
Do not 
  handle 
pump with wet hands or 
when standing in water or on 
a damp surface.
 
Risk of  
  electric 
shock! This pump is supplied 
with a grounding conductor 
and grounding type attachment 
plug. Use a grounded (GFCI) receptacle to 
reduce the risk of fatal electrical shock.
Description
This portable, submersible utility pump
is designed for non- automatic use in
water. The units are equipped with a 9
ft. 3-prong grounding type power cord.
The discharge fitting is designed for
convenient attachment to a garden hose.
Unpacking
Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, return
the unit to the place of purchase for
replacement. Failure to do so could
result in serious injury or death.
ReaD & fOllOw all InStRUCtIOnS
Save theSe InStRUCtIOnS 
DO nOt DISCaRD
Safety Guidelines
This manual contains information
that is very important to know and 
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
 
Danger indicates an  
  imminently 
hazardous situation which, if not avoided, 
WILL result in death or serious injury.
 
Warning indicates a  
  potentially 
hazardous situation which, if not avoided, 
COULD result in death or serious injury.
 
Caution indicates a  
  potentially 
hazardous situation which, if not avoided, 
MAY result in minor or moderate injury.
 
Notice indicates  
  important 
information, that if not followed, may 
cause damage to equipment.
nOte: Information that requires special
attention.
MANUAL
1.  Wear safety glasses at all
times when working with
pumps.
2.  It is required that this unit be
plugged into a Ground Fault Circuit
Interrupter (GFCI). Consult a local
electrician for installation and
availability.
3.  Do not use the power cord or
discharge hose to carry or handle the
pump. Damage to the power cord
or discharge hose may occur. Use the
handle supplied on the pump.
Installation and Operation
 
 
Always disconnect 
electric supply 
before attempting 
to install, service, relocate or perform 
any maintenance. If the power source is 
out of sight, lock and tag in open (off) 
position to prevent unexpected power 
application. Failure to do so could result 
in fatal electrical shock!
 
This unit  
  is not 
designed for use in septic 
tanks or underground vaults 
to pump raw sewage or effluents. Never 
use in hazardous or explosive locations.
1.  This pump has been designed with
1-1/4 NPT discharge size. Connect pipe
or fitting to the discharge threads or
connect the supplied garden hose
elbow fitting to the pump. Thread
the female end of the garden hose to
the male discharge on the pump.
2.  To reduce leakage between the
pump and the hose, place a hose
washer (not included) on the garden
hose before installing to the pump.