Spectrum Brands 72A-190BQREM Series User Manual

Installation and Operation Manual

SCI P/N:  72A-196BAREM Series
 

   72A-190BQREM Series

Date: 6/02/2008

22

27-0027-0111

MAX and MIN data fields are calculated by the PDU.

To reset a MAX field, write a “0” (zero) to the data location.

To reset a MIN field, write “999” to the data location.

The data location will then refresh with new calculated values.

  Authorization: Changing public and private community  

 

  names is recommended to prevent unauthorized access to    

  the device. 

  You can disable SNMP set commands to make use of  

 

  SNMP read-only. 

•

•

Networking Functions

SNMP read community name

“public”

SNMP read/write name

“public”

You can access the SNMP settings using Telnet <unit IP address> 9999. 

The default username and password is “root” and “1234”, respectively. 

Option 0 thru 3 on the Setup page:
Option 0 - Up to three SNMP trap addresses may be entered.

Option 1 - Read Community Name [default = “public”]

Option 2 - Read-Write Community Name [default = “public”]

Option 3 - SNMP Trap Destination Address