Spectralink E340 Leaflet

 

Cisco Systems: CallManager 

72-0170-17-C 

CallManager is a trademark of Cisco Systems 

 

 

FCN + 1 

 

FCN + 2 

 

FCN + 3 

 

FCN + 4 

 

FCN + 5 

 

FCN + 6 

 

FCN + 7 

 

FCN + 8 

 

FCN + 9 

 

FCN + * 

 

FCN + 0 

 

FCN + # 

 

For information on Battery Pack charging and 

setting user preferences, see the Wireless 

Telephone User Guide. 

Press FCN followed by a digit (1-9, *, 0, and #) while 
off-hook to access the feature options programmed for 
your Wireless Telephone template. 

When you are on a call, your Wireless Telephone 
display will show a solid number indicating which line 
you are currently using.  If a second call comes in on 
another line, a flashing second number will appear to 
indicate which line is ringing. If a second call comes in 
on the same line, the line number will begin flashing. 
You can answer the call by re-selecting the line. You 
can switch between calls by repeatedly reselecting the 
line. 

If two or three line appearances have been assigned to 
your feature template, you can access them by pressing 
LINE  followed by either 1, 2 or 3 on the Wireless 
Telephone. 

The Wireless Telephone has two volume levels, low and 
high.  You can set your low volume level by pressing 
FCN while your Wireless Telephone is on-hook, and 
selecting a volume 1 through 8.  While you are talking 
on the Wireless Telephone, press VOL once to switch 
your volume level from low to high and vice versa.  The 
Wireless Telephone will reset to the low volume when 
powered off. 

Press FCN followed by a digit (1-9, *, 0, and #) while off-
hook to access the feature options programmed in your 
Wireless Telephone template. 

NetLink e340 Wireless Telephone 

On/Off  Press and hold PWR.  Two chirps on, 

one chirp off 

Make a call  Press START to get dial tone. 

Hang up  Press END.  Be sure to do this at the 

end of each call. 

Answer call  Press START.  Line indicator comes 

on steady when the call is answered. 

Press HOLD to put your current call 
on hold, or END to hang up.  Press 
LINE + the digit that is flashing. 

Hold  Press HOLD 

Take off Hold  Press LINE followed by the digit for 

the line on hold, which will be 
flashing. 

Function  Pressing FCN while off hook allows 

you to scroll through menu screens. 

User Options  Press FCN while on hook to change 

handset settings. 

Adjust Volume  Press VOL while in a call to toggle 

between base and louder level 

Alarm / Restore 

An alarm sounds when the Wireless 
Telephone cannot receive or place 
calls. You may be outside of the 
coverage area. Walk back into the 
covered area. A restore tone 
indicates service is re-established. 

Beep 

Your Battery Pack charge is low. 
Your Battery Pack needs to be 
recharged or replaced. 

MSG  You have a voice mail message. 

Displays when the Wireless 
Telephone is powered on but not in 
use to indicate that the feature is 
enabled. 

 

info@spectralink.com  •  800.676.5465