Wegener Communications Unity Synchronous Data Option User Manual

UTY4000-007

4

REPORT COMMOND is “r p.”  The report will show if any sync data cards are
available.  The line will read as follows:

 

Sync Data Card #(1 or 2): INSTALLED

 

 

The SYNC DATA report command is “r sd.”  The report will report the sync data
card status in the following form:

 

FUNCTION  CURRENT SETTING

 

RS422  OUTPUT  ENABLED/DISABLED

 

LVDS OUTPUT

 ENABLED/DISABLED

 

SYNC  DATA  RATE  data rate

 

PID

PID

 

STATUS

 

Ÿ 

The sync data card setup cannot be accessed via the front panel with local control
disabled.  The Network must authorize local control.

Ÿ 

The sync data card can be set via the front panel, if local control is enabled, by using the
menu path HARDWARE SETUP / CONTROL SYNC DATA.  Select the parameter you
need to adjust by using the right/left arrows and the <SELECT> key.  Use the up/down
arrows to select the desired setting.  Press the <ENTER> key to initialize the settings.

Ÿ 

Sync Data Card status:  To confirm that the Sync Data card option is available via the

front panel follow the menu path STATUS REPORTS / PARAMETER STATUS.  Use the
right/left arrow keys to scroll to SYNC DATA.

To view how the sync data card is configured via the front panel follow the menu path
STATUS REPORTS / SYNC DATA STATUS.  Use the right/left arrow keys to scroll
through the audio ports configuration.