Xyron 1200 User Manual

Used to guide document into dispenser. Leading
edge of document slides in between tray and
paddle during insertion. Align to right for A3/A4
documents, to the left for letter documents.

Helps ensure 
wrinkle-free output
by providing slight
back-tension on
document.

Provide spring
force on rollers.
Remove
springs to
remove rollers
and cut-blade.

Slides to the left and right to cut output
material after it exits dispenser. Also
can be used to trim excess material
from leading edge of document.

Remove the Xyron System and Document Feed Tray from the packaging. The System is shipped with a sample
supply cartridge already installed. Install the feed tray by inserting it horizontally into the cartridge opening by the
grooves in the left and right dispenser side plates as shown below. When correctly 
installed, the tray will rest horizontally.

Lower groove in 
dispenser side plates

Upper groove
in dispenser
side plates

Step 1 - Insert and align document on feed tray.
Extend the document completely into the cartridge
opening. Align to the left for letter size documents,
to the right for A3/A4 documents.

Document
Feed Tray
Assembly

Cartridge
(reference)

Step 2 - Gently guide the document forward while
turning the handle clockwise.

Step 3 - Trim to desired length using the cut blade
at the roller exit. Apply pressure down on the 
orange blade holder and slide to the left or right.

Holds various lengths and
combinations of film and
adhesive depending upon
application.

Used to advance
cartridge supplies
when rotated
clockwise. Also,
feeds document
through dispenser.

Location where
document exits
dispenser when
handle is rotated
clockwise.