Symbol MC70 User Manual

Page of 166
5 - 6
MC70 User Guide
Simultaneously charges up to four EDAs.
Charging 
Insert the EDA into a slot to begin charging.
 Figure 5-5    
EDA Battery Charging 
Battery Charging Indicators
The EDA’s charge LED shows the status of the battery charging in the EDA. See 
 for 
charging status indications.
The standard battery fully charges in approximately four hours and the extended capacity battery fully charges 
in approximately eight hours.
Charging Temperature
Charge batteries in temperatures from 0
o
C to 40
o
C (32°F to 104°F). Note that at temperatures above 35
o
C, 
charging is intelligently controlled by the EDA and the charging accessory in order to ensure safe operation 
and optimize long-term battery life. 
To accomplish this, for small periods of time, the EDA or accessory alternately enables and disables battery 
charging to keep the battery at acceptable temperatures. The EDA or accessory indicates when charging is 
disabled due to abnormal temperatures via its LED. See 
.
NOTE
     
Use only a Symbol-approved power supply output rated 12 Vdc and minimum 9A. The 
power supply is certified to EN60950 with SELV outputs. Use of an alternative power supply will 
invalidate any approval given to this device and may be dangerous.
H
INWEIS
     
Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung mit einer 
Ausgangsleistung von 12 V (Gleichstrom) und mindestens 9A. Die Stromversorgung ist nach 
EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen 
Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der 
Betrieb kann gefährlich sein.