Sierra Housewares S5010 User Manual

55

Areas

From the Area Status Menu,
you can arm individual areas of
your system.  Each partition can
be armed with full arming, home
arming or instant home-arming.

If an area is not ready to be
armed, your command to arm
this area causes one of two
things to happen.  If your sys-
tem is programmed for Force
Arming (see Section 8), the
area is armed, but any trouble/
faulted zones are automatically
bypassed.  If your system is not
programmed for Force Arming,
the Zone Status Menu appears.
In that case, you must correct
or bypass any trouble or faulted
zones before arming can take
place.

1.

Enter your user code. You see

something like this:

AREA   12345678
STATUS RNAHIRAH

2.

To arm an area using full arm-

ing, press that area number.

3.

To arm an area using home

arming, press the 

 key

followed by the area number.

4.

To arm an area using instant

home-arming, press and hold

the 

 [instant] key for

2 seconds until you hear two

beeps.  Then, enter the area

number.

In any area, only one keypad can be used at a time.  If you try to
use another keypad while one is in use, you see the following:

ANOTHER KEYPAD
IS IN USE