Sangean Electronics Radio RCR-5 User Manual

1. Press and hold the BAND button for 6 second until you hear

    the beep, and the display will flash the current 24/12 hr format.

    Press the TUNING up/down button to select 24 hr (military hr)

    or 12 hr format.

    * After the 24/12 hour format setting, if you don’t wish to make

      any change on tuning frequency step, please press the BAND

      button for 2 times (you will hear the beep for each time),

      then the display will go back to the clock. If you wish to

      change the tuning frequency step, follow the next steps:

2. Press the BAND button again, and it will beep and flash the

    FM frequency tuning step. If you wish to change the FM

    frequency step, press the TUNING up/down button to select.

    a. If this radio was bought in USA, the FM tuning step selections

        are 100KHz/step and 200KHz/step.

    b. If this radio was bought in Europe, the FM tuning step

        selections are 50KHz/step and 100KHz/step.:

        If you don’t wish to make any change, don’t press the

        TUNING up/down button.

3. Press the BAND button again, and it will beep and flash the

    AM(MW) frequency tuning step. Press the TUNING up/down

    button to select 9KHz/step or 10KHz/step.

      10kHz/step should be selected when you are in Europe.

      9kHz/step should be selected when you are in USA.

4. Press the BAND button to complete the setting.