RF-Link Technology XL-2000/H User Manual

CONNECTORS & INDICATORS: 
RF Output: SMA connector epoxied to straight feed point  
antenna in compliance with FCC rules part 15C, 15.203. 
Specifications 
Video: BNC female bulkhead mount 
Audio1/2: RCA female bulkhead mount 
Controls: Channel switch – momentary, toggles through modes/channels 
Indicators: 8 channel LEDs that blink slowly in Standby mode  
ENVIRONMENTAL: 
Operating Temp.: -20 to 70 ºC 
Storage: -30 to 85 ºC 
Humidity: 95% noncondensing 

At powerup, the unit will retrieve the last used channel, program the PLL with this channel, and display the 
channel by blinking the LED the same number as the channel number. 

 

To display the current channel, press the pushbutton once and release.  The current channel will blink.  
After approx. 5 seconds, the current channel will again blink

. 

 

To change to a new channel, press the pushbutton once and release. The current channel will blink. Press 
and release the pushbutton again before 5 seconds has elapsed and the channel will increment by 1 and the 
LED will blink the new channel.  Repeat this step until the desired channel is reached, waiting for the 
blinking to stop each time before pressing the button again. 
  
Once your desired channel is reached, wait 5 seconds until the LED again blinks your desired channel.  
Your new channel is now saved in memory.  
 
 8 CHANNELS ARE AVAILABLE IN 2.4 GHz RANGE. 
 

Copyright © 2000-2006 

 All Rights Reserved