PolyScience VSCR-200AC1B User Manual

www.cuisinetechnology.com

18

•  Accessory hose not properly attached. Make sure vacuum 

hose is completely inserted into the Lid of the canister and 

attached securely to the vacuum hose port on the Vacuum 

Sealer.

•  Port on canister in incorrect position. In Marinate mode, port 

should be in the “Open” position; in Canister mode, port 

should be in the “Vacuum” position.

•  Insufficient head space in canister. Allow at least 1 inch (2.5 

cm) of space between the surface of the items in the canister 

and the Lid.

•  Damaged canister Lid or body. Check canister, Lid, and seal 

for damage.

•  Vacuum Compartment Lid open. Close Lid.
•  Unit has overheated. Press 

On | Off and allow unit to cool for 

20 minutes. Once unit has cooled, press 

On | Off to resume 

operation.

WARNING: When the unit is used for an extended 

period of time without allowing sufficient time 

between sealing, it may overheat and shut down. 

Allow at least 20 seconds between each seal.

!

Electrical Requirements: 

Overall Dimensions: 

Weight:
Maximum Bag/Roll Width:

Model VSCR-200AC1B - 120VAC, 0.9A, 60Hz 

Model VSCR-200AC2E - 240VAC, 0.45A, 50Hz
12.75 (L) x 16.13 (W) x 4.13 (H) inches 

(32.4 x 41 x 10.5 cm)
8.2 lbs (3.7 kg)
12.2 inches (31 cm)