PolyScience VSCR-200AC1B User Manual

www.cuisinetechnology.com

8

Auto - Activates a vacuum cycle followed by a seal cycle. Seal 

time is determined by the setting on the digital display. The LED 

above this button is lit until the sealing process begins. A two 

second audible tone sounds when the process is complete.

Pulse - Manually controls the vacuum process. Press and hold 

the button to apply vacuum, release the button to pause the 

process. The LED above this button lights when this function is 

selected; it remains lit until another function is selected.

Seal - Immediately activates the sealing process when the unit 

is operating in 

Auto or Pulse. If in Auto, the vacuum pump 

continues to run until the sealing operation is complete. The LED 

above this button is lit while this process is running. A two second 

audible tone sounds when the process is complete. This button is 

not operational when 

Marinate or Option have been selected.

Seal Time - These buttons set the length of time in seconds that 

the bag will be sealed.       increases the time,       decreases the 

time. If 0 is selected, the bag remains unsealed. The last seal 

time set is retained when the unit is turned Off or loses power. 

Digital Display - Displays information regarding the vacuum and 

sealing process. The following table describes what you’ll see on 

the display during normal operation.