Transition Networks N-FX-XX-02 User Manual
N-FX Series Fast Ethernet NICs
6
Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours
Troubleshooting
Diagnostics LEDs and Boot ROM
LEDS
The LINK/ACT LED lights when a fiber cable or twisted pair cable connection
is good. It blinks to indicate activity.
The collision and full-duplex LED report board operating status.
is good. It blinks to indicate activity.
The collision and full-duplex LED report board operating status.
Boot ROM
To add the remote boot feature to a workstation, insert the Boot ROM into the
ROM socket. See Figure 1 on page 2.
After power UP, the LINK/ACT LED should light; if not, check the following:
ROM socket. See Figure 1 on page 2.
After power UP, the LINK/ACT LED should light; if not, check the following:
1
Confirm that the N-FX module is properly inserted into the master slot.
2
Confirm that the PC is properly connected to a power source and with the
power source turned ON.
power source turned ON.
3
Check the fiber cable for proper connection.
4
Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600 if those
steps fail to produce the desired result.
steps fail to produce the desired result.
Note: To connect this device to a router, bridge, or switch, please refer to the
corresponding technical manual for the device.
Declaration of Conformity
Name of Mfg:
Transition Networks, 6475 City West Parkway,
Minneapolis, MN 55344 U.S.A.
Minneapolis, MN 55344 U.S.A.
Model:
N-FX-xx-02 and N-FX-xx-02(L) Network Interface Cards
Part Number:
N-FX-ST-02(x), N-FX-SC-02(x), N-FX-LC-02(x)
N-FX-MT-02(x), N-FX-SC5-02(x), N-FX-SC20-02(x),
N-FX-SB201-02(x), N-FX-SB202-02(x)
N-FX-MT-02(x), N-FX-SC5-02(x), N-FX-SC20-02(x),
N-FX-SB201-02(x), N-FX-SB202-02(x)
Regulation:
EMC Directive 89/336/EEC
Purpose:
To declare that the N-FX-xx-02 and N-FX-xx-02(L), to which
this declaration refers, is in conformity with the following
standards:
this declaration refers, is in conformity with the following
standards:
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; FCC Part 15 Subpart B;
21CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s)
and Standard(s).
June 30, 2005
Stephen Anderson, Vice-President of Engineering
Date
7
techsupport@transition.com -- Click the “Transition Now” link for live Web chat.
Contact Us
Technical support
Technical support is available at techsupport@transition.com
• US and Canada:
• US and Canada:
1-800-260-1312 (24 hours)
• International: 00-1-952-941-7600
(24 hours)
Transition now
Chat live via the Web with Transition Networks Technical Support. Log onto
www.transition.com and click the Transition Now link.
www.transition.com and click the Transition Now link.
Web-based seminar
Transition networks provides seminars via live, web-based training. Log onto
www.transition.com and click the Learning Center link.
www.transition.com and click the Learning Center link.
Email
Ask a question anytime by sending an email to our technical support staff:
techsupport@transition.com
techsupport@transition.com
Address
Transition Networks
6475 City West Parkway
Minneapolis, MN 55344, U.S.A.
Telephone:
6475 City West Parkway
Minneapolis, MN 55344, U.S.A.
Telephone:
952-941-7600,
Toll free:
800-526-9267
Fax:
952-941-2322