Klark Teknik U.S.A. Network Hardware DN9652 User Manual

Page of 50
Chapter 4: Rear Panel
DN9650/DN9652 Network Bridge
16
Operator Manual
Mains input
Always replace the mains fuse with one of the same type and rating, as 
printed underneath the fuse drawer.
The mains input section has a mains IEC 
socket, mains fuse compartment and 
on/off switch.  Printed underneath is the 
mains supply voltage and fuse 
specifications.
The mains input is an auto-voltage 
sensing switch mode power supply that 
operates where normal mains voltage is in 
the range 100V AC to 240V AC.
Clock section
This section provides 75 ohm connections for 
two types of external clock for synchronisation:
• BLACK BURST 75R   A single INPUT 
socket provides connection for a video 
signal generator.
• WORD CLOCK 75R   An OUTPUT socket 
and an INPUT socket provide connection 
for an external word clock source.
AES50 section (DN9650 only)
The AES50 section of the DN9650 has three 
EtherCon® XLR chassis connectors for audio 
connections to/from a Midas digital system or 
AES-equipped device.
Each connector supports 24 bi-directional 
channels operating at a fixed sampling 
frequency of 96kHz for compatibility with 
existing Midas and Klark Teknik 
AES50-equipped products.
CONTROL connector
A single EtherCon® XLR chassis connector lets you connect to a 
computer to enable unit configuration and software upgrade.
Mains on/off switch
Supply voltage and fuse information
Mains fuse compartment
Mains IEC socket
BNC chassis connectors
EtherCon® XLR connectors