Klark Teknik U.S.A. Network Hardware DN9652 User Manual
Chapter 5: Configuring the DN965X
DN9650/DN9652 Network Bridge
20
Operator Manual
2
In the Change XXX Module Settings
window, choose the desired options.
For example, select the sample
frequency as 96kHz and the clock
source as MADI Clock (Slave) for a Lab
X MADIX MADI module.
window, choose the desired options.
For example, select the sample
frequency as 96kHz and the clock
source as MADI Clock (Slave) for a Lab
X MADIX MADI module.
3
Click OK.
>> To change the settings of a Klark Teknik 3-Port AES50 Module card
(DN9650 only)
(DN9650 only)
The 3-port AES50 module card is configured in the same way as a network module card
(see “To configure a network module card” on page 19).
(see “To configure a network module card” on page 19).
Clocking options
The Change Clocking Options window lets you set parameters such as enabling the
ASRC, selecting the word clock output source, setting the VBB format, etc.
ASRC, selecting the word clock output source, setting the VBB format, etc.
>> To change the clocking options of a network module
1
In the Clocking Options section of the configuration window, click Change
Clocking Options.
Clocking Options.
2
In the Change Clocking Options window (example shows a Lab X MADIX MADI
Module card), choose the desired options.
Module card), choose the desired options.
3
Click OK.